How Long New Mattress

Home   /   How Long New Mattress

How Long to Air out New Mattress

Taking your new mattress out of its plastic cover should be pretty exciting. Some may experience a chemical-like odor that often goes along with the new mattress, specifically foam mattresses. This scent is often called the “new mattress smell,” since it resembles a similar type of odor people remember from opening a paint container/box. It’s ideal to determine how long to air out a new mattress and ways to do it, before actually using the new mattress.

How Long to Air out New Mattress and Why It’s Important

The strong mattress odor, particularly a newly unboxed one, is actually the result of chemicals, which can often be found in many products. When your new mattress has been rolled up and sealed shut for a long period of time, these chemicals may build up, making it potent when you take your new mattress out of the seal.

New Mattress Chemicals

Your new mattress may be made of a variety of diverse materials, and some of those chemicals-vapors carry substantial hazards to your long-term health. A majority of the mattresses have chemical flame retardants. This chemical has been connected to a variety of severe health concerns, including obesity, cancer, infertility, and developmental brain syndromes. To avoid these health issues, it is recommended to air out these chemicals before using your new mattress.

Remove Plastic Seal Immediately

One of the worst things you can do is keep your new mattress rolled up in the plastic wrap for a long time. The longer your new mattress is stored inside the plastic seal, the longer it’s fermenting, and the stronger those chemical gasses are going to set in.

As soon as you receive your new mattress, remove the plastic wrap instantly, in a well-ventilated area, and let the mattress expand totally. You also need to dispose of the plastic seal in a place away from your home, since the odor is embedded in it.

Decide Where to Air Out New Mattress

If you stay in a relatively rural atmosphere, with many critters like raccoons and mice, you surely don’t want these pests to damage your new mattress. Worse yet, these critters could leave some territory marks, such as feces or urine, on it. In such a setting, air your new mattress indoors. In cities, you might lack enough space and be forced to air your new mattress in the house or perhaps on a balcony.

If you live in the suburbs, however, you may be able to take your new mattress outside to air it out. Your yard is the perfect place to do that. You may also consider leaning it against a clean wall on your porch.

Reducing the Chemical Smell of New Mattress

Now that you have unboxed your new mattress and you want to eliminate the odor of it, the best option is to allow the new mattress to breathe. Follow these tips if you want to have air circulating in your bedroom and lessen the caustic odor of your new mattress.

  • Open your bedroom door.
  • Open windows close to your bed and all over the room.
  • Place an electric fan from the door in the direction of the window to have a cross-breeze going.

Let the cross-breeze continue throughout the bedroom until the smell has notably decreased. Many new mattresses will be free from its smell after several days. Those with serious sensitivity to scents may continue to sense the chemicals, but eventually, the smell will go away.

You may follow this routine for a minimum of 10 hours a day or until the odor is entirely gone. The bedroom or area must also be exclusive for about a week. If you there’s no empty room or space, air it out in a garage or basement that is not prone to humidity, because moisture can cause mold to build-up in the new mattress.

Choose a good time of day

Any odor typically subsides fairly fast on its own. Though, if the slight odor is still bothering you, it is recommended that you expose the new mattress to fresh air, as well as sunlight. You will have to wait and take advantage of the sunny, warm daytime.

If the weather is bad, you still have the choice of airing your new mattress out indoors, but the best, obviously, is to air it out under the sun. Airing the new mattress in the morning, while the sunlight is not too strong, is often a favorable time

Conclusion

It is hard to know which mattress is going to contain unsafe chemicals that may affect your health. Fortunately, there are many online manufacturers and vendors that offer safe mattresses, which will not expose you to harmful gasses. If you already own a mattress that has a slightly foul smell, try some of the remedies to make the odor go away.

8 Easy Ways to Break in Your New Bed (Mattress)

You finally ditched your worn out mattress and you got yourself a fresh new bed. Congratulations, now you can get the restful night of sleep that’s been eluding you for months.

As you lie down and wait for sleep to overtake you, you may start to notice that the minutes are ticking by and you’re not falling asleep.

You toss and turn, looking for a comfortable position. Did you make a mistake? Is your new bed a dud?

You might just need to learnhow to break in a brand new bed. Similar to a new pair of stiff and squeaky shoes, your bed needs time to soften up, too. This article can help walk you through everything you need to know, including what to do if you really did buy a model that’s not a good fit.

Why Do You Need to Break in Your Mattress?

Shoes aren’t the only things that need to be broken in. Car engines, jeans, baseball gloves, and yes, even mattresses, all require a breaking in period.

Think of it this way: you’re used to your old mattress. The saggy indents, the worn-out springs, and the frayed materials are all familiar to you. When you lie down on a new, stiff surface, it’s bound to take some time to adjust to it.

Your body may have been compensating and may not be used to what it feels like to be in proper alignment. Or, the mattress may be especially firm for the first month or two.

Expect the first few nights or weeks on your new bed to feel different. Some people find bliss the first night, while others may struggle for a month or longer.

To accelerate the process of breaking in your new bed, follow the tips below.

Breaking in a New Mattress – Tips & Tricks

Let Your Mattress Breathe

If you bought your bed online, chances are it came compressed or rolled in a box. At the very least, it’s been wrapped tightly in plastic.

The materials may give off an off-gassing odor for a day or two. Further, if your mattress was compressed for shipping, it can take some time to expand to its full size.

Depending on the exact model you bought, it can take four to ten hours to expand to its full size. Sleeping on it too soon not only can cause you discomfort, but it can also affect the ability of the mattress to expand correctly. What may help is allowing your mattress to breathe without any sheets or bodyweight for the first 24 hours.

Put on the Pressure

If you are eager to soften the surface of your bed, try walking on it. This technique works well on latex and memory foam surfaces.

If your mattress is an innerspring or hybrid, crawl on your hands and knees instead. The reason for this distinction is that springs can buckle or deteriorate more rapidly when your body weight is overly concentrated.

If you don’t feel comfortable walking along your bed, try stacking piles of books on it instead.

Be Patient

Try not to get discouraged if you don’t love the way your new bed feels straight away. Your favorite pair of shoes might have given you a blister the first day you wore them, too. Remember, it can take thirty, or even sixty, days for your new mattress to feel like home.

The higher the quality, the longer it might take due to the durability of the materials, so that’s something else to keep in mind during this process.

Warm it Up

If you have memory foam, one thing that you might not have known is that the material tends to soften and become more malleable when it gets warm. Therefore, if you’re in a particular hurry to break in a new mattress, try keeping your bedroom a few degrees warmer than normal. It should make your bed feel softer.

Take note that high temperatures can also disrupt your sleep, so this tip is a bit of a tradeoff. It works best if you’re in a colder room, and you had planned on warming it up anyway.

Sleep on It Consistently

You might get discouraged and be tempted to take a break from the process and spend a night on the couch or in the guest room. It may be helpful to keep in mind that consistent use of your mattress can accelerate the breaking in process. This should allow you to enjoy your purchase that much sooner.

Put It in the Right Foundation

Before plopping your bed on the old foundation, check to make sure the two pieces are compatible and that your foundation isn’t worn out, sagging, or broken. While you may not always need a new foundation, you might need to get a replacement if you’ve switched the type of bed you’re now sleeping on.

Follow Your Gut

If you know that deep down this bed isn’t for you, then by all means, don’t suffer through it. However, it might be worth giving it a chance before rushing to judgment.

Give It the Full Time

Most companies ask customers to spend a specific number of nights sleeping on the material before deciding to initiate a return or exchange. These brands know that many people require some time to adjust to sleeping on something new. The amount of time they specify is usually the upper limit of when their customers either decide they love or hate their purchase.

If they say to sleep on it for thirty nights before asking for a return, then why not give it a go? If you’re concerned about being locked into four or more weeks of sleeplessness, try looking for a company that doesn’t have this requirement or reach out to the brand with your concern.

How Long Does It Take to Break In?

Innerspring

Innerspring models are typically broken in relatively quickly. The springs are naturally designed to adjust to your weight, and the pillow top section above them isn’t overly thick or firm. You may find comfort your first night, though it could take up to four weeks.

One thing to keep in mind with these beds is that the springs can degrade more quickly than high-density memory foam. Because of this, remember to rotate your mattress from head to foot every three to six months.

Latex

There’s some variation in the time periods of latex. It may depend on whether the latex is natural or synthetic and whether the product is pure latex or a hybrid.

Generally speaking, there is a fair amount of air in these beds, causing them to be broken in more quickly. You could expect to be acquainted with your fully broken-in mattress within two to fourteen days.

Memory Foam

Low-density memory foam often feels like a comfortable cloud the first night, but it could leave you feeling like you’re sinking into a hole a few short months later.

Higher-density models may take longer to break in, but they should last you a lot longer. The higher the density, the longer the break-in period of the memory foam model. It could take up to sixty days.

What if It Never Breaks In?

You may know the saying, never say never. Eventually, the mattress should be broken in, though that may not mean that it feels comfortable.

It’s a good idea to at least wait the minimum amount of time required by the manufacturer. After that, if your new mattress is still not a match, then contact the company for a return or exchange.

Exchange

Most companies offer more than one model. Check and see if you can exchange what you’ve got for something softer or firmer.

After all, they’d rather deal with the expense of supplying you with a different bed than losing you as a customer altogether.

Return

If there’s no other available or suitable model from the manufacturer or retailer, then you may have to return your bed and start the shopping process over again. Make sure that you’ve got your receipt to initiate a return.

Also, during your trial period, take extra care not to stain, soil, or damage the product. While most companies will donate your returned item rather than resell it, they could potentially reject your claim if you’ve abused the product.

Frequently Asked Questions

What is the fastest way to make a firm mattress soft?

The fastest way to make it soft is to spend as much time on it as possible. So, in addition to sleeping on the firm surface, sit or lie on it when you’re watching television, reading, working, etc. If you can’t spend that much time on it, pile it with books when you’re not at home.

Is it effective to walk on it?

Yes, this technique is helpful, especially for memory foam and latex surfaces. For innerspring or spring hybrids, it may sound childish, but crawl around on your hands and knees instead of your feet to distribute the weight more evenly and prevent excess concentrated pressure on the springs.

How can I tell if my mattress is too firm?

If you wake up feeling numbness or pain in your shoulders, arms, or hips, the surface may be too firm. Conversely, if your biggest complaint is low back pain, that’s a sign that the bed is too soft.

Is it normal for a new mattress to cause back pain?

While there could be discomfort associated with a new mattress, if you are experiencing back pain every morning, there’s probably another explanation. You might have purchased a firmness level that’s not compatible with your weight or sleeping position.

Another explanation is that the back pain could be caused by your lifestyle. Take a look at how much time you spend sitting or slouching or whether you engage in high-impact athletic activities. Any number of these factors could be responsible for your back pain.

Conclusion

You’re maybe already familiar with the stats about how many years of your life you spend in your bed, so it goes without saying that you shouldn’t have to compromise when it comes to comfort. Before committing to your purchase, make sure you do your research. Here are some helpful hints that can help you out before hitting the purchase button:

  • Read customer reviews. Pay particular attention to those that mention situations similar to yours (low back pain or having arthritis, for example).
  • Review the return policy. Are you required to sleep on the mattress for a certain number of nights? Does the company give you ample time to make a final decision?
  • Find out if the company has an exchange policy. They may allow you to switch your bed out for a firmer or softer model.
  • Check to see if there’s a local showroom where you can try before you buy. Showrooms may not always provide a real-life experience, but they can help if you’re deciding between two models.
  • Find out if the company offers any accessories to help ensure your satisfaction. Some manufacturers provide “comfort kits” that can make your mattress softer or firmer, depending on your preferences.

More Reading:

Author: Sleep Advisor

Our team covers as many areas of expertise as we do time zones, but none of us started here as a so-called expert on sleep. What we do share is a willingness to ask questions (lots of them), seek experts, and dig deep into conventional wisdom to see if maybe there might be a better path towards healthy living. We apply what we learn not only to our company culture, but also how we deliver information to our over 12.7M readers.

Sleep research is changing all the time, and we are 100% dedicated to keeping up with breakthroughs and innovations. You live better if you sleep better. Whatever has brought you here, we wish you luck on your journey towards better rest.

How Long Should You Air Out An Off Gassing Mattress?

Getting a new mattress can be an exciting time, after all, you spend about a quarter of your life in bed, and therefore it’s not only an important investment, but it can drastically improve your quality of life. But things aren’t all rosy; there are some health issues that you need to consider when you receive your new purchase, especially when one of those is an off-gassing mattress.

Although there is a serious debate in the healthcare community about the health impacts of off-gassing, what’s not debated is the effect it can have on the environment and your air quality. Mattresses aren’t produced using only natural ingredients, and therefore the manufacturing process uses machinery, chemicals, and human-made products.

Table of Contents

What Is Mattress Off-Gassing?

Mattress off-gassing is the continualrelease of gases from your mattress, not only at night but also throughout the day. Off-gassing occurs as a result of the breakdown in the volatile organic compounds, known as VOCs, which are emitted as gases or vapors from some of the compounds in the product.

VOCs aren’t rare, in fact, they are found in thousands of the products which we use in homesevery dayincluding cleaning products, paints, and air fresheners. Typically, the VOCs which are released from your mattress will come from the adhesives and foams used in the product.

These VOCs Include:

  • Chlorofluorocarbons (CFCs)
  • Benzene
  • Formaldehyde
  • Methylene Chloride
  • Toluene
  • Trichloroethane
  • Naphthalene
  • Perfluorocarbons

These volatile organic compounds break down over time, slowly releasing these gases into our homes. However, studies have shown that a huge percentage of all the gas that will be released is done so in the first two months of the product being used.

This statistic is important because while VOCs could be harmful. In small quantities, it’sunlikely to have any drastic impactwhile at higher concentrations it could be dangerous. In this first two months, the concentration of VOC emissions is likely to be far higher and therefore during this period you must make an effort to reduce the risk to yourself and your family.

Memory Foam Off-Gassing

Memory foam is so called because it adapts to the shape of your body. Once you stand up, you’ll see an imprint of your body before it quickly returns to the standard shape. Memory foam is viscoelastic foam which is what many popular brands use, including some of the Tempur-Pedic mattresses below.

Many believe that memory foam off-gassing is far more prevalent than other materials, because memory foam mattresses have a more pungent smell which tends to last for weeks instead of days.

For this reason, it’s even more important that you allow the product to air out before you start using it. If you can, leaving it upright near a window for two to three days can drastically reduce the smell and allows much of the VOCs to break down and the gases to be released. As usual, removing the sheets and allowing for regular off-gassing can reduce the smell quicker.

Mattress Off-Gassing How Long?

It’s unrealistic for us to allow it to air out for weeks on end. You need the space in your home, and you want to be able to use the new product that you just paid for. As a result, most experts recommend that you air it out for 24 hours, a number which is backed by the Sleep Products Safety Council.

Once this time has passed, you can smell the surface up close and compare it to how visceral the scent was when it first arrived. As long as the smell doesn’t bother you any longer, it’s okay for you to start sleeping on it. If the scent is too strong, you can continue to air it out for longer and rotate it periodically to ensure that the entire bed can air out.

How To Air Out A New Mattress

When you first unbox one, you’ll notice a potent chemical smell which can be overpowering and nauseating. While the jury is still out on whether it’s dangerous for your health in small amounts and for short periods, the smell is unpleasant, and it can make you reluctant to sleep. To prevent this, you need to do whatever you can to air it out. Here are some tips:

Remove Plastic Cover Immediately

All mattresses will come covered with a thin plastic layer which prevents staining and damage during transportation. However, not only does this plastic have a noticeably unpleasant smell, but it also keeps in the VOCs from the foam and adhesives, preventing them from escaping and causing them to seep back into the bed.

Typically to conform to local safety laws, they are doused with chemical flame retardants that help to reduce the spread of fire. However, some believe that these chemicals can cause a variety of severe health problems including developmental brain disorders and cancer. To reduce this risk, you must remove the plastic and let the gas escape, typically for about 24 hours at least.

Choosing Where To Air It Out

Some bloggers have suggested that airing out your mattress outdoors can speed up the process and allow for greater gas release. However, there seems to be little evidence of this, and it will drastically increase the risk of damage from critters and animals.

Outside it’s likely that bugs will end up on the surface, even if you’re airing it out on a balcony or outside of your condo. Instead, it’s wise to keep it inside at all times to prevent it from becoming tarnished.

The smartest way to air out your mattress is to lean it up against a wall near a range of windows so that only the smallest amount of the surface is touching the floor and wall. This position allows for greater ventilation and ensures that more of the gas is released. If you leave it lying down the gases from the bottom will be unable to escape.

Reducing The Chemical Smell

To reduce the smell which is going to spread through the home, you ideally want to locate the mattress on a wall near to a few windows. By opening these windows, you can create air circulation which will drag out the VOCs and the associated smell, while bringing in fresh air which will allow you to continue to enjoy your home.

It’s also possible to use air freshener to mask the smell but because these release VOCs too it’s not the wisest decision. Instead, lighting a few candles around the home can get rid of much of the scent without putting more dangerous gases into your house.

With an open window and a few candles around the home, not near the mattress, you should notice that the smell dissipates significantly in the first few hours. After 24 hours, almost all of the scent should disappear, allowing you to start using your new bed.

Further Off-Gassing

In the first 24 hours, a lot of the VOCs are released, but they will continue to be emitted for the lifetime of the bed. Noticeably, in the first two months much of the lifetime VOCs will be released, and therefore you would expect the continuation of off-gassing for the first two months.

At least once a week it’s wise to peel back the sheets from the mattress and stand it up straight or lean it against a wall while you’re out at work. This period will allow further off-gassing which is nearly impossible with your sheets on the bed. Doing this once a week for the first eight weeks, with the windows open, will get rid of practically all of the smell and can drastically reduce the VOCs emissions in your home.

Mattress Off-Gassing Symptoms

Although the science is debatable, and experts are still figuring out the truth, many believe that the chemicals and products used in mattresses can cause health problems. Some suggest that they could lead to:

  • Sleep disturbance
  • Neurodevelopment disorders
  • Behavioral issues
  • Fertility problems
  • Skin, eye and lung irritation
  • Cancer from chronic toxic exposure

In particular, the pesticides which are found in textiles can influence the nervous system, contribute to cancer and cause skin and eye irritation.

Similarly, the flame-retardant chemicals, phthalates, and benzene have been linked to other issues including cancer, chromosome damage, fertility problems, and behavioral issues.

Using A Mattress Cover To Prevent Off-Gassing

One method that some homeowners and parents swear by is the use of a mattress cover to prevent off-gassing. A mattress wrap made using a polyethylene sheeting, or similar material can prevent gases from permeating through it, forcing off-gassing through the bottom of the mattress which is less likely to be inhaled.

The main problem is that we sleep directly on our mattresses with only thin cotton sheets, allowing the VOCs to be inhaled easily. A non-permeable cover can prevent this while still allowing the surface to breathe through the bottom. These wraps or covers also act as spill protectors, dust mite barriers and will trap bedbugs too.

Tuft and Needle Off-Gassing

Tuft and Needle mattresses are made using polyurethane foam which is incredibly comfortable to sleep on but more importantly, can be manipulated to fit into a box to ship directly to your home. Polyurethane foam is a common emitter of VOCs and is therefore tightly regulated by CertiPUR-US which measures the amount of gas emitted over a 72 hour period.

The mattresses from Tuft and Needle easily passed their safety test which means it gives off no more than 0.16ppm of benzene over 72 hours and 0.13ppm for toluene. The Tuft and Needle is shipped directly from the factory to your home in a box, and therefore it needs to be allowed to air out.

As with other brands, you’re required to remove it from the box and take off any plastic packaging before you let it expand. Once it is fully extended, you can lean it up against a wall with open windows to ensure circulation and leave it there for 24 hours to reduce the unpleasant smell and to allow the VOCs to be emitted. (Read the full Tuft and Needle Review).

Leesa Off-Gassing

According to some experts, Leesa is one of the most superior online mattress companies which also delivers in a box. With layers of supportive foam, it can help to give you a better night sleep and prevent aches and pains.

As with the Tuft and Needle mattresses, polyurethane foam is used because it’s incredibly effective, cheap and durable. However, it produces lots of VOCs and therefore airing out the bed to allow for off-gassing in the first few weeks is essential. While many would argue that the health impacts are negligible, the smell can be unpleasant and the effort required is minimal. (Read the full Leesa Mattress Review).

Tempurpedic Off-Gassing

Tempur-Pedic is the manufacturer of possibly the most famous mattress of all time, which uses viscoelastic foam that allows for pressure reduction and adaptive temperature contouring. Traditional polyurethane foam which is used by Leesa and Tuft and Needle is excellent, but it compresses under your weight rather than contouring and adjusting.

These Tempur-Pedic mattresses can give you greater support where you need it with little to no counter pressure. However, many would argue that this type of viscoelastic foam, otherwise known as memory foam, has high levels of off-gassing.

To prevent against any increased risk, it’s wise to let your Tempur-Pedic air out for at least 24 hours. Also, ensure that you remove the sheets and stand it up to air out at least once per week for the first two months. After four weeks you will notice that practically all of the scent has disappeared.

Purple Mattress Off-Gassing

Purple is one of the fastest-growing companies of all time, originally started through a crowdfunding campaign. They use a variety of different materials in their mattresses, but for those worried about VOCs and off-gassing, it’s important to note that it uses polyurethane foam just like the Leesa.

Polyurethane foam off gasses quite heavily and because the Purple is transported in a box and plastic wrap, it might need slightly longer to off-gas than a mattress shipped whole in a container without any compressed wrapping. For this reason, make sure to remove the plastic wrapping quickly, let it expand and then lean it up against a wall to off-gas for 24 hours before use. (Read the full Purple Mattress Review).

New Mattress Off-Gassing: How Long Will the Smell Last?

Are you growing tired of your old coil spring mattress? If you are thinking about making the switch to memory foam, you are not alone. A growing number of people are turning to online “bed-in-a-box” retailers that offer the chance to get a new mattress quickly and easily delivered right to your front door. All that you have to do is open the box, sit back and watch your mattress expand to full size. Before you do, learn more about the “new mattress smell” that you can expect when you lay out your new bed, and whether you should be concerned about its effects on your home’s indoor air quality.

What is causing my new mattress to smell?

Most new mattresses will have a certain chemical odor when they are first delivered. This is especially true for those that come in a box, rolled up and vacuum-sealed, because the lack of airflow through the package can cause the “new mattress smell” to become concentrated. When you open your mattress, you will probably notice an odor coming from the foam, caused by a process called off-gassing.

Off-gassing is that “new” smell that we associate with new cars, a fresh coat of paint and, yes, new mattresses. When your mattress comes in an airtight package, the volatile organic chemicals (VOCs) used in the manufacturing process remain trapped in the mattress with nowhere to go. After you open the box and lay out your mattress, the foam starts to expand and some components used to make the mattress will start to break down. These VOCs are then released as a gas, causing the distinct off-gassing smell.

What chemicals do mattress release during off-gassing?

The off-gassing smell usually comes mainly from the foam and adhesive elements of the mattress. The exact chemical makeup of the VOCs that off-gas from a mattress varies from mattress to mattress, but independent tests have shown that they can include benzene, toluene chlorofluorocarbons (CFCs) and formaldehyde.

On the websites of many leading mattress brands, such as Purple, Casper and Tuft & Needle, you can find information on the different VOC certifications and standards that they adhere to. Common certifications to look for are CertiPUR-US, GREENGUARD Gold and STANDARD 100 by OEKO-TEX.

Is off-gassing harmful to your health?

VOCs are emitted by a wide range of household products, including furniture, paint and cleaning supplies. Exposure to VOCs can cause nausea, headaches, dizziness, loss of coordination and eye, nose and throat irritation, though, in the case of mattress off-gassing, many consumers report that these symptoms go away once the mattress has been aired out. Some of the more severe health effects caused by VOC exposure can include damage to the kidneys, liver or central nervous system. Additionally, some VOCs that off-gas are suspected or known carcinogens, such as formaldehyde.

One thing to remember, however, is that you are exposed to relatively low levels of VOCs while your mattress is off-gassing, and studies have yet to show whether exposure to low levels of VOCs during mattress off-gassing will cause increased health effects over time. Even so, the cumulative off-gassing of items in your home can contribute to adverse health effects, according to the Minnesota Department of Health. Long-term exposure to VOCs in the air can increase cancer risks, as well as cause damage to the kidneys, liver and central nervous system. For this reason, both mattress manufacturers and indoor air quality experts recommend letting your mattress off-gas in a well-ventilated area, preferably one outside of your home.

How long will my mattress off-gas?

Some mattress manufacturers may take steps to make sure that some of the off-gassing processes happens before the mattress is packaged and shipped. However, it should be noted that even if the bulk of the off-gassing occurs outside of your home, your mattress will still off-gas in some capacity throughout the time that you have it in your home.

The amount of off-gassing that you can expect depends on the type of mattress that you buy, the density of the foam inside the mattress, the chemicals used in the manufacturing process and the way that your mattress is packaged. The strongest off-gassing smell will fade within a few days to a couple of weeks, according to most major mattress manufacturers, though you may notice a faint smell for longer.

How much do leading brand mattress off-gas?

Tuft & Needleoffers two different polyfoam mattress options: the Original and the Mint. Both hold CentriPUR-US, GreenGuard Gold and STANDARD 100 by OEKO-TEX certifications. Buyers of Tuft & Needle mattresses can expect mild off-gassing that dissipates within a few days.

Leesamattress is a CertiPUR-US certified multilayer foam mattress made from a combination of memory foam and polyurethane. After opening, buyers will notice a strong off-gassing smell that should fade within a few days.

Casperoffers three different mattresses: the Caper, the Wave and the Essential. All three are made with layers of memory foam and polyurethane, but the Wave also includes a layer of natural latex. All Casper mattresses are CentriPUR-US certified. You can expect some off-gassing from Casper mattresses, but the odor typically dissipates within 24 hours.

Purplemattresses consist of an elastic polymer grid layered over CertiPUR-US certified polyurethane foam. New Purple mattresses may have a very faint off-gassing smell that fades quickly. However, many consumers report no off-gassing smell at all.

Tempur-Pedicoffers a wide range of memory foam mattresses. The off-gassing odor strength varies among models, but consumers can expect it to dissipate within the first two weeks.

Tips for off-gassing a new mattress

Some manufacturers recommend airing out a new mattress for three to seven days in a garage or well-ventilated room before sleeping on it, while others claim that you can start using your mattress within the first few hours after opening it. Use your nose as your judge. Avoid sleeping on your new mattress while you can still smell a strong off-gassing odor. If the strong smell persists after a week or two, consider returning your mattress and searching for a more air-quality-friendly alternative.

How can I speed up the off-gassing process of my new mattress?

When searching for a new mattress, pay attention to the VOCs used in the manufacturing process. If you cannot easily find the chemical compounds present in the mattress, and you cannot get a straight answer from the manufacturer, consider exploring other brands. You have a right to know which potential chemical emissions you may be bringing into your bedroom.

Your mattress manufacturer will list recommendations for the off-gassing of your particular mattress, but listed below are some helpful tips to speed up the off-gassing process.

  • Open your mattress outside of your house and let it off-gas for at least two days in a well-ventilated area with a cross breeze.
  • If you cannot avoid off-gassing your mattress inside of your home, you should open your windows and increase air circulation where possible. Fans and air filtration systems can also help improve the ventilation in your house.
  • If you have a spare room, try leaving your mattress in there to off-gas for the first few days before bringing it into your bedroom.
  • Some manufacturers recommend pouring baking soda on the mattress while you air it out to speed up the off-gassing process.
  • If you would like to use the new mattress but the off-gassing smell persists, you can add a mattress cover to help contain the chemical smell to the bed. When you remove the cover to wash it, you will likely smell the off-gassing odor again, though it should dissipate over time.

While the health effects of mattress off-gassing are still being studied, it is always a good idea to protect yourself from VOC exposure whenever possible. It may be hard to avoid off-gassing altogether when you buy a new mattress, but by following the simple steps above, you can enjoy a good night’s sleep knowing that you are actively protecting your indoor air quality.

How Long Does It Take To Get Used To A New Mattress?

BY: Chris Young, getbestmattress.com

A mattress is never meant to last, no matter how much we love and feel comfortable with it. Over time, it starts to depreciate as the weight of your body becomes too much for it to carry. Usually, indentations become permanent, causing the mattress to break down even faster.

Purchasing a new mattress can be an exciting time, and many people fall in love with their mattresses right away, but it can also be a time of some trepidation. Difficulties can present themselves when you’re trying to get comfortable with something that is new. You may think that the mattress doesn’t exactly conform to your body. It may take a while before you become comfortable and acquainted with your new mattress.

In this case, there are several things that you might want to review when trying to break in your new mattress.

WHAT TO EXPECT FROM A NEW MATTRESS.

(1) It may take some time for your body to become familiar with the new materials that comprise the mattress. Your old mattress has conformed to your body type, so it might be a while for your body to consider the new mattress to be as comfortable as the old mattress. It can take up to eight weeks for your body to adjust to the new surroundings. Some people are allergic to some types of materials, so it may be wise to check what are the materials that were used to manufacture the mattress.

(2) On occasion, you might be privy to a smell that comes with the new mattress . This is normal after taking off the protective coating that covers it after being sent from the factory. Smells that were at the location where it was being manufactured will become trapped when it is sealed. These smells will stay in side of the packaging until they are released when opened. This doesn’t mean that the mattress is ruined. The smell is not harmful to people. The odors should dissipate over time, allowing the person to use the mattress without the annoying smells.

(3) When you receive the new mattress, you may notice that there are several scuffs, blemishes, or loose threads that are seen. This is normal from the manufacturing of process and doesn’t mean that it is damaged. These small complications are very common and don’t change the durability, the comfort, or the validity of the warranty that comes with the mattress.

(4) You may experience the mattress as being too thick or tough because of it being new. Modern mattresses that are created today are manufactured to be thicker than those built in the past. You may notice that your bed is further from the floor than it was before. Your older sheets may not fit, and you may have to purchase others to accommodate the new size. Many times, the headboards and the footboard can be adjusted in order to change the size of the bed to match the new mattress. You can purchase deep-pocket sheets to fit your new mattress to make it more comfortable and to match your tastes better.

(5) One thing to remember after purchasing your new mattress is to give it a firm and sturdy support. If you don’t have a strong foundation that supports the mattress, then it will start to sag and degrade causing your warranty to become invalid. King and queen sized mattresses require that you have a bed frame with a middle support.

These are but a few things that might happen while trying to incorporate a new mattress into your sleeping regimen. You must keep in mind that several obstacles my present themselves while you become accustomed to the change. Remember that all mattresses that are manufactured in the United States are hand-made and may have several errors that creep into their manufacturing process. You may see possible skipped threads, or errors with the seams, as well as fabric scuffs and other issues. This doesn’t destroy or hinder the performance of the mattress, or devalue the warranty that comes with it.

HOW WILL YOU FEEL DURING THE FIRST COUPLE OF DAYS?

After inspecting and setting up your new mattress, you are now ready to sleep on it and to see how it will feel for your body. There will be many kinds of differences that you will associate with the new mattress. Here are some of the complications that you might experience while resting on it for the first few nights.

(1) You may find that you are waking up sore from a night’s rest on the new mattress. This is the most common complaint that is made by people. Your body has become to the way that the old mattress has been comforting your body, but in the wrong ways because it is old and needed to be replaced. Now, your body is finally being supported in the correct manner and now it must become familiar with the correct way of resting on a mattress. After some time with resting on the mattress, your body will feel less sore, leaving you with an adequate night of sleep and comfort.

(2) You might expect to find falling to sleep difficult and distracting but eventually, this will stop as your body becomes more familiar with the nuances of having a new mattress.

(3) You may toss and turn at night as you try to rest.

(4) Waking up in the middle of the night might be an issue as well, but it will subside in several days as you become more accustomed to your bed with a new mattress.

The amount of time that it will take for you to become used to the fact of having a new bed will not take long as your body begins to rest better. It is different for many people and the length of time can vary. It can take a few days for some, and for others, they discover that it takes longer.

In the end, you should eventually be able to rest on your new mattress as you finally head off into a good night sleep. It is suggested to try the mattress for at least 30 days in order to truly assess whether it is the best mattress for you.

Add a Comment: