How Long Does Mattress Take To Dry

Home   /   How Long Does Mattress Take To Dry

How to Clean a Mattress.

How to steam clean mattress

To steam clean mattress is an excellent way to thoroughly clean your mattress. However, before you steam clean your mattress, there’s something you need to be aware of. Steam cleaning your mattress will inevitably wet and dampen your mattress and wet mattress is a bad news. Mattress saturated with moisture is a breeding haven for mold and bacteria and it won’t take long till your mattress is completely ruined.

Before you decide to steam clean mattress, you should know that steam cleaning tends to remove the colors from the mattress. Something you should keep in mind.

Unless you own a steam cleaner, you are going to need to hire professional upholstery cleaner or rent a machine yourself. When you steam clean mattress, you should perform it in the morning on a warm, sunny day so you can take your mattress out on the sun to dry it completely after you’ve steam cleaned mattress. It’s important to minimize wetting the mattress when you steam clean mattress. Key here is less water and more vacuum strength.

If you are not comfortable with the idea of steam cleaning your mattress, you can perform a safer and more organic cleaning method and still enjoy a similar method. Make a cleaning solution by diluting a mild dish soap and warm water. Remember not to use too much water. Usually a couple of squeezes of dish soap for a cup of water work fine.

You will want to use a spray bottle to apply your solution to minimize the water from penetrating into the mattress. Make sure you spray a thin coat of the solution. Gently scrub the mattress using a sponge and blot dry the mattress using clean dry towels. Next vacuum your mattress thoroughly. After you’ve finished cleaning the mattress, use a blow drier to completely dry off your mattress or take it out on the sun.

I cannot stress how important it is to prevent your mattress from being damp to prevent mold and bacteria forming on your mattress. You should take every measures you can take to minimize wetting the bed and dry the mattress completely afterwards.

How to Clean a Mattress Tip #1

Prevention is easier than cure. Using mattress protectors simple as vinyl zip covers can drastically increase the lifespan of your mattress and protect it from unwanted bugs, mold and inadvertent spills. This small investment you make for protecting your mattress will save you a lot of headache and hassle in the future.
Shop for mattress protectors at Amazon

How to Clean a Mattress Tip #2

Sprinkle some baking soda on your mattress and watch the odor and moisture disappear! Just let it sit for a few minutes then vacuum your mattress.
Order baking soda at Amazon

How to Clean a Mattress Tip #3

Every month or two, make a habit of taking your mattress outside when it is warm and sunny. The sunlight will vaporize all the moistures trapped in the mattress and kill the mold that might’ve built up over time.

Prevent toddler bedwetting with these potty training tips

How to Dry a Mattress Quickly

How to Dry a Mattress Quickly

Related Articles

  • 1 How do I Recondition Mattresses?
  • 2 Remove Stains From a Pillowtop Mattress
  • 3 Clean Mold From an Expensive Mattress Pad
  • 4 Take a Mold Smell Away From a Water Bed

A soggy mattress soon takes on a musty smell, and within a day or two, may even begin to grow mold deep inside it. Of course, not every wet mattress is salvageable. If the mattress was in a flood, the water likely was contaminated with biohazards and dangerous chemicals or fuel. In that case, even if you could sanitize the inside of the mattress sufficiently, mold from lingering moisture could invade unseen. Mattresses that avoid complete saturation — such as those wet from spills, rainwater leaks, water used to put out a minor fire or similar sources — can be salvaged, as long as you work quickly and dry them thoroughly.

Blot up the moisture if the spill or wet area was minor and small. Use a clean, absorbent cloth or towel and apply as much pressure as possible to force the moisture out of the mattress, into the drying pad. Follow with a hairdryer, set on high. Hold the hairdryer a few inches from the mattress surface and apply heat for at least 15 to 20 minutes. Allow the area to cool down completely before determining if it is dry or not. After 30 minutes, proceed to another drying method.

Sprinkle clean kitty litter over the mattress surface. Apply pressure to the litter to force moisture out of the mattress and into the absorbent littler. Place a towel or cloth over the litter before pressing, if you prefer. Wait an hour or two and press again. Suck up the litter with a wet/dry vacuum. Repeat with fresh litter if moisture remains, then vacuum. Follow with heat from a blow dryer or proceed to another drying method if moisture remains.

Flip the mattress up, on its side, and securely prop it in place so there is at least 2 feet of air space on either side. Place a fan at the end, blowing down both sides, or use two fans to point directly at the mattress on either side. Open windows in the room and turn on ceiling fans, as applicable, to create as much air movement in the room as possible. Turning up the heat, using a space heater — set as a safe distance from the mattress — or similar measures also help accelerate drying.

Alternatively, take the mattress outside. Set up a platform, if possible, such as concrete blocks or sawhorses, to rest the mattress on and allow maximum air movement. Otherwise, turn the mattress on its side and securely prop it up. Allow the mattress to stay outside in the wind and sun until it is dry. Speed the drying process with a couple of fans, hooked up to extension cords, pointed at the mattress. Return the mattress inside once it is completely dry.

How much does mattress cleaning cost?

On average nationwide, mattress cleaning costs between $50 and $150, but the average cost is $100. The price covers labor and varies according to mattress size and other factors.

Most companies that clean carpets and upholstery also offer mattress cleaning services. There are companies that specialize in mattress cleaning, too.

A clean mattress protects your health and the air quality in your home by removing allergens. It’s also more pleasant to sleep on a fresh, clean mattress than a soiled, smelly one. Before you hire a mattress cleaning professional, estimate your potential price with a breakdown of common cost factors, and know what to expect in the cleaning process.

What’s in this cost guide?

What impacts the cost?

The total cost of mattress cleaning will be different for everyone. These are the most common factors that impact how much you’ll pay.

The size of the mattress

Cleaning companies charge by the size of the mattress. The larger the mattress, the more it costs to clean it. Nationwide, below are the average mattress cleaning costs by size:

Cleaning the underside of the mattress or just the top and sides

Some people only clean the top and sides of their mattress because it’s more likely to have stains. Removal of these stains is a key part of the cleaning process. Cleaning just the top and sides means no lifting the mattress, so there’s less labor, and less labor means you pay less.

A Thumbtack mattress cleaner in Schenectady, N.Y., will clean the top and sides of a mattress and the sides of a box spring for $60 for a king, $50 for a queen, $45 for a full and $35 for a twin.

How many mattresses you get cleaned

Some mattress cleaning services offer discounts or special pricing if you clean more than one mattress at a time.

A Thumbtack pro in Austin, Texas, charges $119 for the first bed, no matter the size, and $90 for each additional mattress. Some companies clean pillows for an additional charge, others include it in the price of mattress cleaning.

Add-ons like allergy relief and stain removal

Allergy relief, also called antimicrobial treatment, is a liquid solution that gets rid of dust mite waste. It adds an extra layer of cleaning that can help relieve people with allergic reactions to dust. A Thumbtack pro in North Brunswick, New Jersey, charges $15 for an allergy relief treatment.

If your mattress is stained — for example, you have urine stains on your kid’s mattress — you can get spot cleaning or a full stain removal service.

Why should I get my mattress cleaned?

Two words: Dust mites. They’re microscopic arachnids that live in your bed on the mattress, and on pillows, curtains, carpet, and upholstery. They eat people’s flaked-off dead skin cells. Ick.

They’re aren’t harmful themselves, but around 30% of Americans are allergic to the mites’ waste products. The Centers for Disease Control says a mattress can have 10,000 to 10 million dust mites, enough to make for a nasty sleep.

Since you spend one-third of your life on your mattress, a bed full of dust mites is a problem. Even if you don’t have any allergic reactions, a deep cleaning can get rid of dust mites and other gross stuff like viruses, odor, body oil, stains, and mold. It can also reduce your chances of a bedbug infestation.

How often should I have my mattress professionally cleaned?

Experts recommend a deep cleaning once a year, twice a year if someone in your family suffers from allergies or you let your pets sleep in your bed.

If your mattress gets stained, schedule a cleaning immediately. The sooner you clean the stain, the more likely you are to remove it completely.

No matter how deeply you clean you your mattress, dust mites always return, so make hiring a mattress cleaning pro part of your annual cleaning schedule.

Using a mattress protector will keep your mattress stain-free between cleanings. You can also do a DIY cleaning with baking soda and essential oils between professional visits.

Types of mattress cleaning techniques

Professionals clean your mattress using a variety of cleaning methods, including high-powered vacuums, dry steam, ultraviolet light and infrared heat. Here’s info on each cleaning technique:

Ultraviolet Light

Ultraviolet light kills microbes and dust mites, so it acts as an antibacterial sanitizer for mattresses. The UV light breaks apart the DNA of the germ so it stops reproducing and dies.

The contractors at Clean Sleep come to your home with a truck-mounted machine that cooks the germs with UV rays. Other services use handheld UV machines.

Steam Cleaning

Cleaning your mattress with a steam cleaner is another common technique. This method uses a steam cleaner with steam heated to several hundred degrees, then sprayed on your mattress, to kill dust mites, remove stains, and neutralize odor in a mattress.

It’s done with the same steam cleaners used to clean upholstery and carpet and uses cleaning solutions. Since steam cleaning uses water, you’ll need to let a mattress dry out for three to four hours before putting sheets or mattress toppers back on it.

Dry-Steam Cleaning

Dry-steam cleaning uses a machine that produces dry-steam vapor with a very low percentage of water heated to a couple of hundred degrees. Dry-steam cleans and sanitizes a mattress without cleaning solutions, so it’s more eco-friendly and the mattress isn’t damp once it’s clean.

Infrared Heat

Clean Sleep has a machine that heats a mattress to 150 degrees while cleaning it. This removes excess moisture and kills dust mites.

What’s included in a mattress cleaning service?

Not sure what to expect when a professional comes to clean your mattress? Here are the standard steps they follow:

  • Step 1: You remove the linens. This is a good opportunity to wash them, so you can have a fully clean bed to sleep in at the end of your contractor’s visit.
  • Step 2: The technician vacuums with a high-powered commercial machine to remove surface dirt and other debris.
  • Step 4: The technician pre-treats for stain removal with a cleaner.
  • Step 5: The technician cleans the mattress using one or a combination of the methods we mentioned above. If you’ve opted for an anti-allergy treatment, they’ll apply a liquid to the mattress that deactivates allergens.
  • Step 6: The technician vacuums the mattress again to remove dead mites and their waste products, pet dander, and any other debris remaining.

How long does the cleaning take?

Cleaning a mattress can take anywhere from 20 minutes to 2 hours, depending on the techniques used and the number of mattresses cleaned. If a damp cleaning method is used, the mattress will need to dry out for two to four hours before putting sheets back on it.

How to hire a mattress cleaning professional

Before you hire a contractor to clean your mattress, be sure to use the following tips:

  • Look for a qualified professional: Find a licensed, qualified professional with experience in mattress cleaning.
  • Look at past projects: Make sure the pro has experience cleaning mattresses.
  • Get multiple free estimates: Knowing a general range for mattress cleaning costs will give you the confidence to hire a pro who’s not over- or under-charging. Make sure the estimate is specific and lists the exact services included in the quote.

How to clean a mattress pad

Get the latest from TODAY

Just because you don’t sleep directly on mattress pads doesn’t mean they don’t get dirty.

Between dust mites and dead skin, spilled food and drinks, bladder leaks (or worse), mattress pads collect some gross stuff. So how do we clean them? The fact is, since mattress pads come in an assortment of materials — cotton, plastic-backed, foam, egg crate, down — there is no universal way to do it. That’s why TODAY Home asked green-cleaning expert Leslie Reichert for advice on tackling this chore. Not only does she know the best way to clean, she keeps it eco-friendly.

How to clean a cotton mattress pad

"Most manufacturers recommend cleaning cotton mattress pads at least every two or three months, depending on use," said Reichert. "Always follow the instructions on the care label, but, as a general rule, machine wash on warm or cool using a mild detergent."

Tumble dry on the lowest temperature recommended, using wool or rubber dryer balls or a few tennis balls to keep the pad fluffy. If machine drying is not recommended, then air dry.

How to clean a vinyl-backed mattress pad

Always follow the instructions on the care label of the pad, but, in general, vinyl-backed mattress pads can be machine washed in cold or warm water on a gentle cycle using mild detergent. Never use bleach on these pads, cautions Reichert, as it may damage the backing. Also, to assure an equal distribution of laundry detergent, allow the machine to fill with water, add the detergent, swish to mix andthenadd the pad into it.

If machine drying is recommended, tumble dry on low heat only. High heat will damage the vinyl. Toss in a few dryer balls or tennis balls to help the pad dry more evenly.

If air drying is recommended, hang the pad outside on a clothesline. If you don’t have clothespins to fasten the pad to the clothesline, drape across the line with the vinyl side facing up. Once that side is dry, drape the pad across the line with the cotton side up.

This site is protected by recaptcha Privacy Policy | Terms of Service

To avoid odors, mold or mildew, make sure the pad is completely dry before putting it on the bed.

Yes, you CAN fold a fitted sheet neatly

How to clean a foam mattress pad

Be sure to follow manufacturer’s instructions before cleaning foam mattress pads because foam pads are more delicate than fabric versions. They can shred and tear in washing machines and melt when dried at high temperatures. "Your best bet is to spot clean them," Reichert said.

To spot clean, begin by vacuuming both sides of the pad. Next, clean stains with an enzyme-based cleaner, such as Oxi-Clean or a solution made from equal parts water, distilled white vinegar and lemon juice. To keep the stain from spreading, start applying cleaner on the outside of the stain and work in circles toward the center. Allow the cleaning solution to sit on the stain for 15 to 20 minutes. Rinse by soaking a clean sponge in cool water and blotting water into the stained area. Remove water by blotting with a clean towel. Continue until most moisture is removed. Or, remove excess water using a wet/dry vacuum. Allow pad to air dry by laying it on a flat surface, turning occasionally so it can dry evenly.

If the entire pad needs to be cleaned, lightly spray with a solution of one part mild, low-sudsing detergent to two parts water, or use equal parts water, lemon juice and white vinegar. If extra cleaning power is needed, you can add an enzyme cleaner. Allow the solution to sit on the pad for 20-30 minutes. Rinse lightly in the tub or shower using a hand-held shower head. Squeeze — never wring out! — the extra water, or remove it by using a wet/dry vacuum. Lay the pad flat for several days, turning a couple of times a day, so it can dry evenly.

If you don’t have the space or time needed to dry a foam pad, consider spot cleaning or replacing the pad altogether.

How to clean an egg crate mattress topper

The first step to cleaning an egg crate is to vacuum it on both sides to remove dirt and debris. If the manufacturer’s care label indicates that the egg crate is machine washable, wash it only in a commercial or oversize washer because agitator-type machines may tear the foam, Reichert suggests. Use a gentle cycle and a small amount of mild detergent.

If machine washing is not an option, consider spot-cleaning the egg crate. Spray the stained areas with a solution made from equal parts water, distilled white vinegar and lemon juice. Allow it to sit for 15-20 minutes. Rinse the stained areas completely in the shower. Fold and press the egg crate or use a wet/dry vacuum to remove excess water.

Lay the egg crate on a dry, flat surface to dry. To prevent mold, mildew and odors, do not place egg crate on the bed until it is completely dry.

How to Dry a Mattress Quickly – 5 Easy Steps

A water leak, a minor spill, a major spill – we all know that accidents happen. Sometimes your bed is the injured party, so knowing how to dry a mattress easily in your own home is very useful. If your mattress has been exposed to moisture, it’s important to start the drying process as soon as possible, as mold and mildew can set in very quickly in a humid, warm environment.

It’s important to note that if your mattress is completely saturated with water, or has been underwater for over 24h, it may not be salvageable. The same applies if the water it was exposed to is contaminated or contains biohazards, as dangerous chemicals or other substances could remain inside even after drying.

Additionally, foam mattresses unfortunately can’t usually be saved but an attempt can be made nonetheless, using the same method below.

What You’ll Need to Dry Your Mattress:

  • An absorbent towel or cloth
  • A hairdryer
  • Kitty litter or baking soda (either works)
  • A wet/dry vacuum
  • A well-ventilated room or a sunny outside area
  • Fans (optional)
  • Space heaters (optional)

Table of Contents

Blot with Absorbent Towel

The first thing you should do is blot up as much of the moisture as you can with an absorbent towel or cloth. Even paper towels or toilet paper can work if your regular towels aren’t doing the trick.

Image Source

How To:Put the towel over the affected area and apply as much pressure as you can to force moisture out of the mattress and into the towel. Treat the entirety of the affected area this way and continue until you’ve removed as much moisture as you can.

As an added step, you can use a hairdryer to help the drying process further. Turn it onto the highest setting and hold it a few inches away from the mattress to heat up and help dry the affected area. Repeat until you’ve covered the entire affected area, but don’t stay in one spot for longer than 15 minutes or the heat could damage the fabric.

Absorb Remaining Moisture

Sadly, it’s impossible to get all the moisture out with just a towel and a hairdryer, so the next step is to absorb the remaining moisture using powder. The most efficient way is with clean kitty litter, but baking soda works as well so use whichever you have on hand. Generally, kitty litter works quicker, while baking soda might need a little longer to absorb the moisture.

How To:Lay the mattress down flat and sprinkle the powder/litter over the affected surface, covering it completely. Place a towel over it and press down to force the moisture into the power/litter. Let the powder sit for anywhere between 2-12 hours (shorter for litter, longer for baking soda) and try to repeat the pressing every 1-2 hours. If you like you can put flat items with a little weight to them, such as books or cutting boards, on top of the towel to keep up a constant pressure.

Use a Wet/Dry Vacuum

Once enough moisture has been absorbed you should use a wet/dry vacuum (also called a shop vac) to remove the powder/litter. Avoid using a regular household vacuum for this purpose. The reason for this being if a normal vacuum sucks up moisture it could get damaged, and whoever’s operating it might also get an electric shock.

Image Source

How to:Remove the towel and any weights you may have put on it and use the vacuum as normal. Make sure you get all the powder/litter off the mattress. If any moisture remains the process can be repeated again, as many times as needed.

Prevent Mold Forming

One important thing to know about how to dry a mattress is how to inhibit the growth of mold.

How To:By combining one part rubbing alcohol and one-part water you can create a simple cleaning solution that prevents mold and mildew. A clean cloth can be dipped into the moisture, wrung out, and then rubbed over the surface of the mattress. Make sure to wring the cloth out completely and be careful not to overly saturate the fabric with the solution, as this will make the moisture problem worse. You should treat the entire surface of the mattress with this solution for best results.

Let it Air Dry

The final step is to let any remaining moisture air dry. If it’s sunny outside and likely to stay that way, taking the mattress outside is a great way to do this.

How To:Prop the mattress up against a wall in direct sunlight, or if you have access to things like sawhorses you can create a platform with them for it to rest on. Make sure to leave at least 2 feet of air space on each side to ensure proper air circulation and quicker drying. If you have long extension cords you can also move fans outside to help with the drying further.

If you can’t take the mattress outside, air-drying inside works as well, but be sure to open the windows in the room you’re using. Use fans placed on either side to help circulate the air and try to keep the room warm through the use of space heaters or radiators so the moisture evaporates.

If it’s winter and you struggle to keep the room warm with the windows open, try opening and closing them in intervals to allow for both evaporation of moisture and ventilation of the room.

Add a Comment: