How long does a mattress last?
My mattress is getting on in years. In fact, Bill Clinton was in his first term as president when I last bought a new one. Is it time for me to replace my mattress?
You’ve probably logged more than 30,000 hours in your bed, and your mattress has likely become less comfortable and less supportive. But there’s no set formula for determining when you need to replace a mattress. It might be time to buy one if:
•You regularly wake up tired or achy—you make Oscar the Grouch seem as cheerful as Mr. Rogers.
•You tend to sleep better away from home, than in your own bed. Are you planning unnecessary business trips or looking for any reason to go on a weekend getaway?
•Your mattress looks or feels saggy or lumpy—it needs go on the Abs Diet.
•You’re over age 40 and your mattress is five to seven years old. Remember, your body tolerates less pressure as it ages. As if getting older weren’t tough enough . . .
A mattress can be an expensive investment—we’ve tested models that cost in excess of $4,000—but if you treat your new one properly, it could easily last 10 years. Our advice:
•Don’t let your kids use your bed as a trampoline.
•Rotate your mattress. If you have a single-sided mattress (you sleep on only one side), rotate the mattress from end to end—that is, move the mattress 180 degrees. The foot of the mattress is now at the head, and vice versa.
If you have a double-sided mattress, rotate it as above, then turn it over so the bottom is now on top.
Perform these steps every two weeks for the first three months you have your new mattress, then once every two months thereafter. You’ll find illustrated instructions on a number of different Web sites.
• Use a bed frame that has a center support.
Essential information:See “How to buy a mattress without losing sleep” for detailed advice on finding the perfect bed. And watch our video buying guide.
How Long Do Mattresses Last? The Results May Shock You!
Mattresses are pretty expensive — one quick glance at our buyer’s guide will confirm this fact. This is why many people do not replace them – not even after many years of use.
They do not want to spend a lot of money on a new one. Besides, now you can delay the process of buying a new one if you do an excellent job at maintaining your existing one.So, how often should you replace your mattress?
It doesn’t matter which type of bed you have. Most of them are ready for replacement within ten years to ensure a good night’s rest (old mattresses can hurt your sleep quality). Besides, it can last beyond ten years on average, if the owners maintain it properly.
Also, many different factors affect a bed’s lifespan. You can extend its life expectancy by following a few easy steps in the text below. We prepared and wrote down some tips to boost its longevity.
How Often Should You Change (and Clean) Your Pillows?
If you can’t really recall whenthe last time you changed your pillowwas, it might be the right time to do it.
There is a general rule of thumb that you ought to do so at least once a year or two years at worst.
There are a few different reasons for which you’d want to consider doing so, and we’ve taken the liberty of elaborating a bit on this topic.
Why Replace Your Pillow
Your pillow has a direct impact on the way your neck and head are supported, and when they are brand new, the support is the best. This keeps your spine aligned which translates to a great night of sleep. Keep this in mind.
You sweat. That’s a fact. Furthermore, your dead skin cells peel and all of this gets absorbed in the pillow. With time, you might experience certain allergic reactions or skin inflammations resulting from these – it’s important to keep this in mind.
How Often Should I Wash My Pillow?
The general rule of thumb is three weeks, even though you could do it more frequently. This is what’s considered a great habit to get into. Should you do so, rest assured that you wouldn’t experience any issues regarding hygiene.
Types of Pillows & Replacement Timeline
Memory foam pillows should be replaced once a year. Their conforming is great, but they tend to sag. The material is not that reliable, and that’s the main reason for it.
Down pillows should also be changed once a year, maybe a little longer than that. They tend to lump quite a bit, and it is at that point they’d become unusable.
Latex is more durable than memory foam, and as such, if you have a latex pillow, you can replace it once every two years. They are more expensive as well.
Feather-based are amongst the most common types out there, and they are also usually the more inexpensive ones. You should change these at least once a year even though certain people recommend even more often.
These should be changed once every year and a half as bamboo fibers tend to be a bit more reliable than cotton ones.
Frequently Asked Questions
Can Pillows go in the dryer?
Some of them can – others can’t. For instance, you can throw a bamboo pillow in the dryer, but you can’t put a feather-based one in it as you risk making a substantial mess.
Are there health risks associated with an old pillow?
The more you use a pillow, the more its properties diminish. Think of it as amortization. An old and inappropriate pillow could cause spinal misalignment so – yes, there are health risks associated with old pillows.
The most important thing to consider is your health. As such, you are obligated to ensure that everything is handled as per the highest standards. Follow the above guidelines to guarantee that your pillow is in perfect condition and that it delivers the necessary capabilities.
Sources and References:
- When Should You Replace Your Pillow? – sleep.org
- Pillows: A Hot Bed Of Fungal Spores – sciencedaily.com
Author: Sleep Advisor
Our team covers as many areas of expertise as we do time zones, but none of us started here as a so-called expert on sleep. What we do share is a willingness to ask questions (lots of them), seek experts, and dig deep into conventional wisdom to see if maybe there might be a better path towards healthy living. We apply what we learn not only to our company culture, but also how we deliver information to our over 12.7M readers.
Sleep research is changing all the time, and we are 100% dedicated to keeping up with breakthroughs and innovations. You live better if you sleep better. Whatever has brought you here, we wish you luck on your journey towards better rest.
Transparency Disclosure– We may receive a referral fee (at no additional cost to the buyer) for products purchased through the links on our site or other applicable pages. To learn more, please read our full disclosure pagehere. We also encourage you to read about how we may research and/or test Products here.
6 Types of Foam – Qualities To Look Out For
10 Top Rated Trundle Beds – Our Reviews and Ratings for 2020
How to Properly Wash (or Clean) Your Pillows
How Can You Make a Mattress Firmer – 7 Helpful Tips And Tricks
How To Pick a Carpet for Your Bedroom
Menopause and Insomnia – What’s Burning? Oh, it’s me.
Our 8 Highest Rated CBD Oils for 2020
What is Beauty Sleep and How Can I Get it? The Science Revealed
9 Tips for Sleeping Better in a CPAP Mask
Sleep Chronotypes – Are You a Bear, Wolf, Lion, or Dolphin?
Transparency Disclosure– We may receive a referral fee (at no additional cost to the buyer) for products purchased through the links on our site or other applicable pages. To learn more, please read our full disclosure page here.We also encourage you to read about how we may research and/or test Products here.
- About Us
- Contact Us
- Terms & Conditions
- DMCA Policy
- Sleep Calculator
There’s no one-size-fits-all when it comes to better health and better rest, but no one has time to sleep, let alone figure out how to upgrade the sleep they’re getting.
From figuring out how to buy a mattress, suggesting ones that are good for different needs and body types, or breaking down the newest science behind technology and wellness breakthroughs, Sleep Advisor has you covered.
How long does a hospital mattress last
How long does it take to inflate? Many medical air mattresses can take 20-45 minutes to inflate initially.
One section of my mattress has not yet inflated. Is something wrong?
No, this can be a common problem that is easily solved. The most common problem is a kink in the air hose. Solution: Open the cover and check the air tubes under the cells that run along the inside of the mattress. Massage the hose with your fingers to make sure there is not a kink in the hose. Apply some weight to the mattress and allow some time for the mattresses pump to reinflate all the sections.
My mattress is not holding air. Solution: Check and make sure the CPR tag has not been pulled out. This tag is used to deflate the mattress quickly in the event of an emergency. Make sure both CPR plugs are secure and in place and reinflate.
Can this mattress be inflated faster than 20 minutes? Solution: Yes you can use a standard hand or powered pump by connecting it to the CPR tag. Removing the CPR tag will open a direct valve that allows air to flow quickly into the mattress at a faster pace.
What happen if there is power failure? Will the mattress system still work?
Some of our mattress systems (like the 8000 , pm8080 have the patented Cell-in-Cell designed air cells. This means the inner cells will stay inflated for at least 24-hrs when there is no electricity. Some other mattress system have 2-layers of air cells and bottom cells acts as same function of the inner cells. Our other systems have a pocket at the mattress base for you to insert a layer of foam to give patients a peace of mind if power failure does happen. Check out more alternating pressure mattress systems listed on our website. We offer the highest quality alternating pressure mattresses for sale at the best possible prices!
How do I know if the pressure (comfort) setting of the mattress is suitable for my weight?
If there is bottoming-out that means the pressure setting is inadequate (or too low) for you. Bottoming-out can be checked by sliding one hand between the deflated air cell and directly under the patient. Users should be able to feel the minimal contact. If there is an incident of bottoming-out, simply adjust the pressure range a little higher.
Is the mattress cover safe to my patient?
All of our mattress cover have passed the bio-compatibility test of ISO-10993-5. These covers are also fire retardant. They have passed the flammability test of Cal TB116/117. However, most patients use a sheet on top of mattress for added comfort.
How do I clean the mattress and pump?
For pump, wipe with a damp cloth and a mild detergent and keep it away from dust. For mattress, clean the cover and air cells by using a gentle laundry detergent allowing the unit to air dry.
How come there is no air produced from some air outlets of air tube?
This will depend on the kind of system you’re using. Some system are alternating therapy products. That means air alternates between each air outlet; therefore, wait for the complete cycle of the alternating phase. Other system are low-air-loss (static) therapy products, there should be a steady airflow coming out of air outlets unless if the system reaches their preset pressure level or please check if there is any kinked air hoses.
What should I do if the mattress has not enough air and alarm (if applicable) keeps coming up?
Maybe there is a low-pressure situation, check to see if the air hose connection between pump and mattress is tightly secured, the CPR valve is sealed and if there is any leakage on air cells or air hose connection.
What if I accidentally puncture my mattress?
Luckily, most of our mattress system are designed with interchangeable air cells. That means each air cell can be taken out individually and replaced with a new one if it’s needed
If you product is defective. Please call us or email us right away. call 1-800-733-9207 or email us at [email protected]
We will send you a prepaid UPS tag so you can call UPS for a pick up. You will not have to pay for a return of defective merchandise. We will then ship out a replacement out via UPS so you will never be without a product while we determine if the item can be repaired under the mattress warranty.
What if I do not like the item?
If the product is not defective but the item is not what you expected it can be returned to us for a credit.
In order to receive a credit for your purchase the item must be returned within 48 hours from the date you received the item. 25% restock fee will apply. Approved returns require an RA#
Please understand "ALTERNATING PRESSURE MATTRESS" systems cannot be returned once opened due to health care regulations. Its unsafe to sell these "returned" products as new to other customers.
It is the responsibility of the customer to return the item to us unless the product is defective
The product must be returned unused in its original packaging. Products that are used will void the warranty and cannot be sold to other customers.
Opened mattresses cannot be returned due to health code regulations.
Alternating pressure mattress systems cannot be returned due to health and insurance regulations.
Approved returns are subject to additional Fees such as cover replacement
make sure the bill to name and or order # is included with the return.
Hospital Beds: A Guide
Hospital Beds: A Guide
Even at home, a hospital bed can be useful and even necessary. But there are so many options – how do you know what to get?
*Starting price as of 11/6/18
Choosing a hospital bed and other adaptive bedroom equipment can be a very daunting task. Just the thought of redesigning your bedroom, removing your beautiful furniture and having to replace it with all this medical equipment, is overwhelming. It’s hard to imagine replacing your dresser with a patient lift, your nightstand with a commode, your sofa with a geri chair and your bed with a hospital bed… In many situations, you may want to avoid it altogether, but you know that this is what’s best for yourself or your loved one.
But even once you accept the reality of the situation and feel ready to go ahead with the changes, the process of switching over can still be difficult and stressful, since there are so many different options to choose from. Today, let’s explore the different hospital bed types and their advantages as well as hospital bed accessories.
Manual, electric or somewhere in between?
Starting out, there are three basic options to choose from. There is a manual bed, a semi electric bed and full electric hospital bed.
Manual Hospital Beds:The positions and height of the manual bed is controlled manually, using a crank, so anytime you want to change the position of the bed there is manual labor required. However, if the patient does not require constant position changing, a manual bed might be the best option. Keep in mind that there are some manual beds that don’t have the same range of positions as an electrical bed has, so if the patient needs to be put in many different positions, an electrical hospital bed might be a better option. The manual bed is usually a lot cheaper, so if there is a caregiver that is able to do this work, the manual hospital bed is definitely the most economical way to go.
Semi Electric Hospital Beds:A semi electric bed has a motor that controls the adjustments needed for the feet and head, so with the push of a button you can easily change those positions. However the height of the bed is still manual. So if the patient needs the head and leg rests to be repositioned frequently, but not so much the height, a semi electric bed might be perfect. The semi electric beds are usually a bit more expensive than the manual beds; however, you get the added benefit of not having any manual work needed to adjust the two ends of the bed.
Full Electric Hospital Beds:An electrical bed is plugged into an outlet and is controlled with a remote that usually attaches to the side of the bed. All the different positions can be changed very easily, thus eliminating the need for any manual labor. In addition to the control over the feet and head, the height of a full electric bed can easily be changed with the push of a button. This can be important if the patient needs the bed to be lowered often to make it safer to get in and out of bed, and then raised again to allow caregivers to reach the patient easily. If this is something that will be a necessity, a full electric hospital bed would be the best option of the three basic types of hospital beds.
Other bed options
There are some other options as well. For patients that have a high risk of falling out of their bed, a hi-low bed might be the best and most secure option. The hi-low bed goes down to as low as 7 inches off the ground, so if the patient does fall, the fall will be from a low height. Obviously in such cases a fall safety floor mat should also be used to help minimize and injury which can be incurred by a fall. Another way to avoid falls altogether is to use a half or full length bed rail that is designed to keep patients from falling.
Another option available is the bariatric hospital bed or the heavy duty hospital bed, which is made for patients that range from 350 to 1000 pounds. They are designed to be more durable and much wider to accommodate the needs of a bariatric patient. The bariatric bed is usually much more expensive, however in lots of cases there might not be too much of a choice.
To learn about home hospital bed options in the UK, check out this Hospital Profiling Bed Guide by Alpine HC.
Just like with the beds themselves, there are also many different options in regards to which mattress you should get. The most typical hospital bed mattress is the innerspring mattress. It is more or less the same as a regular mattress and is the perfect choice for patients who do not have to spend a lot of time in bed.
For patients that have to be in bed for longer periods of time, a foam prevention mattress might be a lot better. When a patient lies for long periods of time on a regular mattress, the risk of developing painful bed sores is increased. The foam prevention mattress is made in a way that helps such patients avoid these problems. For patients that already have bed sores or an ulcer, an alternating pressure relief mattress is what’s needed. These mattresses are designed in a way that the air cells in the mattress are alternatively inflated and deflated, thus offering soothing relief for the patient.
Hospital bed accessories
Some features and accessories to consider when buying a hospital bed include bed rails or bed canes that can both prevent the patient from falling off the bed, and assist with getting in and out of bed. These products can also be useful for patients who need some help repositioning themselves or turning over in bed. Some come with added support with feet on the ground and some have a board that goes underneath the mattress. Whatever you do, make sure that the patient doesn’t try climbing over the rails, which can be very dangerous. If the patient needs more than just the basic help getting up, lots of hospital beds have the ability to have a trapeze bar connected to it, which the patient can independently use to pull themselves up into a sitting position. If the hospital bed of your choice does not come with that ability, there is an option to get a trapeze bar that comes with a base that goes at the head of any bed.
Disclaimer: No information presented on this website or in this guide is medical advice or intended as a substitute for the advice of a physician. All information on this website concerning medical conditions is from publicly available sources.
Have you purchased a hospital bed in the past? What are your favorite features? Let us know in the comments below!