How Fix Air Mattress Hole

Home   /   How Fix Air Mattress Hole

How to Repair Air Mattresses

Air mattress leaks make the mattress useless until found and repaired.

Hemera Technologies/AbleStock.com/Getty Images

Related Articles

  • 1 Fix Holes in a Waterbed
  • 2 Fix a Leak in an Air Mattress With a Hot Glue Gun
  • 3 How do I Repair the Tear in My Patio Furniture Cushion Covers?
  • 4 Repair the Arm on a Leather Loveseat

Whether an air mattress is designed for camping or as a makeshift bed for overnights guests, it is bound to develop a leak of some sort, eventually. An air mattress leak may be found near the inflation valve stem, along a seam, or anywhere on the main body of the mattress. Any leak renders the mattress useless until it is repaired. You can use repair kits designed for for the mattresses, and even tire repair kits, when it comes time to fix that pesky leak.

Inflate the air mattress at least halfway full. Close the valve cover so air stays in the mattress. Press down on various parts of the mattress and listen for escaping air to determine the area of the leak. Mark the hole or tear with a piece of masking tape if you find the leak. If the leak is small, you may not be able to hear it or see it.

Saturate a sponge with soapy water, then rub the soapy water on parts of the mattress where a leak is suspected. Apply pressure to the mattress to force air out of the leak. Look for bubbles in the soap on the mattress to determine the leak location. If nothing shows up, apply more soapy water to another part of the mattress, including seams and where the valve stem is attached to the mattress. Continue until a leak is found. Mark the leak with a piece of masking tape.

Inflate the mattress until half to 3/4 full if it has deflated significantly, closing the valve to seal air in. Wipe any remaining soapy water off with a damp paper towel, then dry it off with a dry paper towel.

Put on the rubber gloves. To repair a pinhole leak within an air chamber, cut a piece of yarn several inches long with the scissors, threading the yarn through the needle. Apply cement from the patch kit onto the pinhole leak and all over the threaded yarn, ensuring the entire piece of yarn is well coated. Grab near the pointed end of the needle with vice grips, clamping them onto the needle tightly. Push the threaded end of the needle through the pinhole leak, pushing the needle into the mattress at least half an inch, or more if the needle is long. Pull the needle back out, keeping it near the mattress, then cut the folded yarn protruding from the pinhole leak. Allow the cement to dry thoroughly.

Repair a small leak along a seam by applying a generous amount of rubber cement from the patch kit to the seam area, smoothing it a bit with a rubber-gloved hand. Once the rubber cement is mostly dry, cut a patch from the patch kit to fit over the leak. Apply cement and secure the patch in place as per the package instructions. Instructions vary among manufacturers. If the hole is too large for a patch, the mattress might not be fixable.

Repairing a leak along the inflation valve is not always possible. If the valve itself has a hole — rather than a crack — in it, cement from the patch kit will help. If the valve is cracked and old, or partially torn away from the mattress, it may not be repairable. You can attempt to patch it as in Step 4 in a pinch, but chances of success are less on the valve, because it is a different material and difficult to patch.

How fix air mattress hole

How to Fix a Hole in an Air Mattress Without a Patch Kit

Nowadays, more users are choosing air mattresses because of so many reasons and benefits. For instance, they are the best temporary mattress you can use at home without spending a lot of budgets while at the same time enjoying the comfortable sleeping experience just like premium mattresses out there. But it’s essential to understand how to fix a hole in an air mattress without a patch kit.

One of the leading causes of holes in air mattresses is using them outdoors, such as in camping activities. However, it can also be due to an improper method of putting air in the bed. Forcing too much air in your air mattress can damage it and cause soreness and discomfort while sleeping on it. So it’s essential to read the instructions before using your bed.

Fixing a Hole in an Air Mattress Seam

Small leaks can lead to more severe problems. The most common cause of damaged air mattresses is improper inflation. Whether you’re facing issues with a new air mattress or trying to fix an old one, make sure to know how to fix a hole in an air mattress seam before you do any repair.

The process of fixing an air mattress with a hole involves finding the potential leak and covering it with an adhesive patch. On the other hand, you can still repair it if you don’t have a patch kit. Check out the following tips below to guide yourself when improving your damaged air mattress:

Know where exactly the leak is coming from.

Over time, air mattresses tend to lose air while using it in a more extended period. Therefore, you need to re-inflate it to enjoy a comfortable sleep every night. The support system provided by well-inflated air mattress also contributes to the overall comfort of sleeping on this mattress.

During cold months, air mattresses typically deflate quickly.

Other models don’t get inflated to the fullest unless you use them more frequently. It is where locating the leak can be tricky – you need to spot the exact area where the air is naturally lost and where the hole is causing the leak.

Before using the mattress, testing it out for air issues can help you get the most out of it.

Also, inflate your air mattress to its full capacity to make sure it’s ready for use. However, if you’re uncertain where the leak is exactly coming from, put some pressure on your mattress, and find where the hole is.

Use various ways to locate the leak.

There are a lot of ways to find a hole in an air mattress. For instance, you can re-inflate the mattress while feeling some air bursts at the same time. If it’s still tricky finding the hole, checking the valve is the best thing to do.

Also, you should check the bottom of your mattress since potential leaks are usually found there. Sharp objects under your mattress might be the culprit for the holes. Add some weight and notice where the hissing sound comes from, and you will undoubtedly locate the gap in your air mattress.

Wear rubber gloves for vinyl adhesive protection.

Now that you’ve found the hole, it’s time to fix your air mattress even without a patch kit. Apply the vinyl adhesives onto the leaked areas or holes to stop the air from coming out. Make sure to cover all the holes so that you can re-inflate your mattress again to its full capacity without the air escaping from it.

After coating the holes with vinyl adhesives, allow them to dry out.

Once you have coated the holes with your vinyl adhesive, wait for several minutes to dry them. When you’re sure that all the holes are dried, apply more like a second coating. The more layers, the firmer your coat will be. The thickness must be at least 1/16 inches.

Let your mattress dry.

After all the steps, the final one is to allow your air mattress to dry. You probably need 48 hours to make sure the newly fixed mattress is ready for use. If not, let it dry for a more extended period to be sure you won’t take off the vinyl adhesive.

Patching an Air Mattress on the Felt Side

If you have air leaks on the fabric part of your mattress, the steps are the same as the ones mentioned above. They are the standard method if you want to learn how to patch an air mattress on the felt side. After all, the goal is the same, and that is to boost the firmness of your bed and enjoy a good night’s sleep.

Once you have located the hole, sanding and cleaning the leak is the next step. It is only necessary if the hole is in the fiber or fabric layer of your air mattress. Deflate your mattress, rub it with superfine sandpaper, and then patch the uniform surface. Use a wet cloth to remove dirt around the hole for smoother patching.

On the other hand, if you feel that your mattress can no longer be repaired, then it’s a smart decision to buy a new air mattress to save yourself from stress and wasted effort.

Best Air Mattress Repair Kit

Tear-Aid Fabric Repair Kit, 3 in x 5 ft Roll, Type A

Provide a simple and easy method of patching holes and tears. Easy pee.

Coghlan’s 8880 Airstop Sealant, 0.27-Ounce/ 8 ml

Repairs air mattresses, pools, beach toys, groundsheets, rainwear, and.

XFasten Fabric and Vinyl Repair Tape, Clear, 3-Inches by 20-Inches (2-Set)

Waterproof Vinyl Repair Tape that can withstand extreme outdoor condit.

If you want to fix your damaged air mattress, choosing the best patch kit for an air mattress is the ultimate solution. You can use a DIY patch or a thin plastic to cover up holes. Another useful option is using hot glue to make sure all the leaks are concealed. But if you don’t have the choice, you can use duct tape to stop the air from coming out of your mattress.

Most importantly, check your air mattress’ warranty to know if you can still get a refund or replacement. Most of the air mattresses available today are provided with lifetime warranties. So, can you now fix your air mattress bed even without a patch kit?

A Handful of Ways to Fix an Air Mattress Leak

There are very few inventions more convenient than an air mattress (read our buyer’s guide) when it comes to hosting the occasional houseguest in a cramped apartment or enjoying the great outdoors as a glamper. Conversely, there is almost nothing worse than that “sinking” feeling when one suddenly awakes, flat on terra firma, surrounded by the squishy remains of a leaky air bed (find out why it happens). Fortunately, there are many fixes for this deflating situation!

No matter the solution, here are a few universal prep steps:

  • Confirm that there is a leak; sometimes temperature change, or a new mattress that hasn’t had the chance to fully expand will lose air. Re-inflate and see if the same situation occurs.
  • If there is a pinhole, rip or tear; locate it. This is easier said than done. Position the blow-up mattress up against a wall with the bottom facing you, as this is where the majority of holes will be found. Also, check seams. If the leak is elusive, you can feel for the leak, listen for escaping air, or run a soapy sponge along the surface, looking for telltale bubbles to emerge where the leak is.
  • Once the leak has been located, mark it with a permanent marker and thoroughly clean the area, allowing it to dry completely before continuing.
  • If the mattress has a flocked or textured surface, gently sandpaper the area of the leak, exposing the flat vinyl surface and creating a flat expanse to affix the patch material.

Once you have finished these prep steps, there are several repair techniques you can choose from, depending on your circumstances.

  1. Use the patch kit that came with the mattress. This is great advice if you can actually find the patch kit. I classify this advice with the same well-intentioned suggestion to “replace the button you’ve lost with the one that came with the shirt you bought eight months ago”. Sensible but usually an impossibility! Alternatively, there are air mattress patch kits that you can purchase if you have the time to look.
  2. Purchase a bike tire patch kit. There are arguments for and against the self-adhesive patches that come with some of these kits, but basically, if the patch can stand up to the pressure of being ridden on, it will be more than sufficient for an inflatable bed.
  3. Make your own patch from a shower or pool liner. Any thin plastic material will work. When making your own patch, be sure to make it big enough so that it completely covers the leaky area and actually overlaps it to ensure air tightness. Use super glue, gorilla glue, contact or rubber cement, or even epoxy as your adhesive. In other words, no. Your kid’s school glue isn’t going to work!
  4. Use hot glue to fill in a tear along the seam. Caution! Be careful when applying the hot glue not to let the tip of the glue gun make contact. Otherwise, you will melt the air mattress and have a much bigger problem.
  5. In a pinch, use squares cut out of a t-shirt, applying gorilla glue both to the surface area of the leak and to the cloth square before adhering them together.

Video Instructions

Finally, as a temporary measure, there’s always duct tape. The glue on the tape will eventually wear out, so only use this method until you have the ability to replace it with a more permanent fix; and be sure to clean off all the residue from the tape before applying a patch.

Good luck and sleep tight!

Additional Resources

Author: Sleep Advisor

Our team covers as many areas of expertise as we do time zones, but none of us started here as a so-called expert on sleep. What we do share is a willingness to ask questions (lots of them), seek experts, and dig deep into conventional wisdom to see if maybe there might be a better path towards healthy living. We apply what we learn not only to our company culture, but also how we deliver information to our over 12.7M readers.

Sleep research is changing all the time, and we are 100% dedicated to keeping up with breakthroughs and innovations. You live better if you sleep better. Whatever has brought you here, we wish you luck on your journey towards better rest.

How To Patch and Fix A Hole In An Air Mattress

Having an air mattress that is deflated can be the worst thing that can ever happen to you at night and thus, it is best to know how to fix it yourself in case it ever happens. The first step is to find the leaky area and this can easily be done by yourself with a cheap patch kit and household objects. It is natural for an air mattress to lose air and thus before you decide to remove the cover from your mattress, you will first of all need to search for holes.

You will need to have the mattress re-inflated, whether there is a leak or not. Things like cold air will instantly cause the shrinking of your mattress and when the temperatures change at night, you will find that your mattress will soften a bit. This problem can be prevented by having a space heater by your mattress.

Things You Will Need

Step-By-Step Instructions

Step One: Finding The Leak On Your Air Mattress

  • After you purchased your patch kit, you will need to stretch it and don’t be alarmed if you feel it going soft immediately after inflating it in the first few times before they start adapting. If you are suspecting a leak, you will need to inflate the mattress fully. If after several minutes it becomes severely deflated, then there is a leak. After you blow the mattress up, you will need to sit on it and it shouldn’t be able to sink 1-2 inches under your weight, if it does, then there is a leak.
  • If after doing all the above, you are not sure if you have a leak or not, you can leave your mattress inflated for a night and put weight on it. If in the morning you find that it is deflated then you have a leak. As you search for the leak, you will need to keep the mattress inflated. If the mattress become softer, you will need to re-inflate it before you begin the search again. It will be easier for you to notice the leak when the pressure inside the mattress is high.

You can also check the valve holding in the air by holding your hand over the valve and feeling for any air escaping out of it. You will find it at the right next to the air pump, and it looks like a plug that is easy to detach in order to deflate the mattress. If the valve is the one having a problem, it will be hard for you to repair it at home and thus, you will need to take it to the nearest technician or order a replacement from the manufacturer.

If there is a quiet room that is large, you can use it to stand the mattress up in order to check out for the leak. In most cases, mattress bottom is what suffers from leaks and punctures quite often when things are accidentally left underneath. Ensure that you inflate the bed, fully and then place the mattress up on its side to check its bottom. You will need to have space enough to turn, flip and move the mattress around as you search for the leaks.

  • In order to know where the leak is located, you will need to place your ear closer to the mattress and listen for the hissing sound. Move your ear across the mattress slowly, keeping it close enough to ensure you hear the escaping air. When the leak is finally found, producing a hissing sound.
  • To do this, you will have to start from mattress bottom, then move to its sides, and then finish up with the front if you don’t find anything. You will have to wet the back of your hand and repeat the process if you are unable to find anything in your first round. If there is any air escaping the mattress, it will quickly dry your hand, making you feel cool. For small leaks, you will have to run your moisture hand along the entire surface. You can also leak your lips and use them to feel any escaping air from the mattress. Lips are very sensitive and it will be easy for you to find out where the air is escaping.
  • If after using your hand and lips you can still not find the leaky area, you will have to resort to using soapy. Even though some manufacturers warn against using this method as it will attract the development of mildew and molds, it is still one of the best ways to locate a leak. You will have to spread soap water that is bubbly and it will automatically make the air mattress blow into it through the hole thereby exposing the leak.
    • How do you go about it? You will need a small bucket filled with water and a few drops of dishwashing soap. Slowly wipe down the surface using a sponge. You will need to start from the valve working to the seams, underside and then to the top. When you see bubbles forming then that is where the leak is.

    Wipe the soapy water with a sponge that is clean when you have established it. Circle the area using a sharpie or a pen because when the mattress is deflated it will nearly impossible to find the leak.

  • Immediately you get to know where the problem is and you mark it, deflate the mattress completely. If you use the soapy water method, ensure that you have a towel which will quickly dry the area near the leak and mark it. Leave the mattress to dry in the sun for about 1 to 2 hours.
  • Step 2: Fixing The Leaky Area

    Now you have found the leaky area and you want to fix it. There are several methods you can use to do this at home and let me share a few of them

    1. Buying and Using A Patch

    Step 1:You will be able to get a patch from almost any outdoor store in their camping section. We recommend this vinyl patch kit. It works any kind of inflatable mattress. It is a small affordable kit that contains patches air mattresses, tubes boats, and many other inflatable devices.

    How to Repair Air Mattresses

    Air mattress leaks make the mattress useless until found and repaired.

    Hemera Technologies/AbleStock.com/Getty Images

    Related Articles

    • 1 Fix Holes in a Waterbed
    • 2 Fix a Leak in an Air Mattress With a Hot Glue Gun
    • 3 How do I Repair the Tear in My Patio Furniture Cushion Covers?
    • 4 Repair the Arm on a Leather Loveseat

    Whether an air mattress is designed for camping or as a makeshift bed for overnights guests, it is bound to develop a leak of some sort, eventually. An air mattress leak may be found near the inflation valve stem, along a seam, or anywhere on the main body of the mattress. Any leak renders the mattress useless until it is repaired. You can use repair kits designed for for the mattresses, and even tire repair kits, when it comes time to fix that pesky leak.

    Inflate the air mattress at least halfway full. Close the valve cover so air stays in the mattress. Press down on various parts of the mattress and listen for escaping air to determine the area of the leak. Mark the hole or tear with a piece of masking tape if you find the leak. If the leak is small, you may not be able to hear it or see it.

    Saturate a sponge with soapy water, then rub the soapy water on parts of the mattress where a leak is suspected. Apply pressure to the mattress to force air out of the leak. Look for bubbles in the soap on the mattress to determine the leak location. If nothing shows up, apply more soapy water to another part of the mattress, including seams and where the valve stem is attached to the mattress. Continue until a leak is found. Mark the leak with a piece of masking tape.

    Inflate the mattress until half to 3/4 full if it has deflated significantly, closing the valve to seal air in. Wipe any remaining soapy water off with a damp paper towel, then dry it off with a dry paper towel.

    Put on the rubber gloves. To repair a pinhole leak within an air chamber, cut a piece of yarn several inches long with the scissors, threading the yarn through the needle. Apply cement from the patch kit onto the pinhole leak and all over the threaded yarn, ensuring the entire piece of yarn is well coated. Grab near the pointed end of the needle with vice grips, clamping them onto the needle tightly. Push the threaded end of the needle through the pinhole leak, pushing the needle into the mattress at least half an inch, or more if the needle is long. Pull the needle back out, keeping it near the mattress, then cut the folded yarn protruding from the pinhole leak. Allow the cement to dry thoroughly.

    Repair a small leak along a seam by applying a generous amount of rubber cement from the patch kit to the seam area, smoothing it a bit with a rubber-gloved hand. Once the rubber cement is mostly dry, cut a patch from the patch kit to fit over the leak. Apply cement and secure the patch in place as per the package instructions. Instructions vary among manufacturers. If the hole is too large for a patch, the mattress might not be fixable.

    Repairing a leak along the inflation valve is not always possible. If the valve itself has a hole — rather than a crack — in it, cement from the patch kit will help. If the valve is cracked and old, or partially torn away from the mattress, it may not be repairable. You can attempt to patch it as in Step 4 in a pinch, but chances of success are less on the valve, because it is a different material and difficult to patch.

    Add a Comment: