How Do You Keep Futon Mattress

Home   /   How Do You Keep Futon Mattress

How to Keep a Futon Mattress in Place

A futon adds visual interest and versatility to a room design.

Related Articles

  • 1 Jute Web an Antique Chair
  • 2 Lift Grasshopper Mower Decks
  • 3 Replace the Seat on a Director Chair
  • 4 Maintain Vinyl Decking

A futon is a decorative, affordable and contemporary sofalike furnishing that coverts to a bed. To ensure that your futon mattress doesn’t slip out of position, you can secure it to the metal or wooden frame with foam or rubber grip strips. Foam grip strips have adhesives that permanently stick to the frame, making removal difficult, so rubber, mesh-like grip strips are a better option. However, thick mattresses may require stronger, more durable foam strips to ensure a secure hold. Futon mattress grip strips can make your rest time comfortable and relaxing.

Take all pillows, cushions and linens off the futon mattress. Remove the futon mattress from the frame and place it on the floor. Fold the futon frame into the flat bed position.

Measure the length of the seat deck, using a measuring tape. Measure a slat or the edge of the frame closest to the front of the futon for the best gripper placement. When the seat slat is narrower than the rubber grip strip, measure the width of the slat.

Cut the rubber grip strip to the length and width of the seat slat. Place the rubber strip in position on the futon frame. Resistance holds the rubber strip against the frame, alleviating the need for sticky adhesives. Make sure the rubber grip strip doesn’t fall between the slats, or it may become visible under the frame.

Convert the futon to the sofa position, and place the futon mattress back on the frame. Leave the futon mattress folded in half, so you have easy access to the back deck of the futon frame.

Measure and cut a rubber grip strip to fit the length of the back deck. Many futons don’t have horizontal slats on the seat back, so the rubber grip strip will likely cover a series of vertical slats. Place the rubber grip strip near the top of the back deck, unfold the mattress and press the top against the rubber strip.

How To Keep A Mattress From Sliding Around

We have compiled 12 ways on how to keep your mattress from sliding. Since everyone’s bedding setup is different, we have several options for you to pick from.

Also, many of the gripper ideas below will work on mattress toppers and all types of mattresses in the world.

Table of Contents

12 Methods On How To Keep Your Mattress From Sliding

Gorilla Grip Mat– The best option. The Gorilla Grip is made for this exact purpose.

Yoga mat– Surprising yoga mats are quite grippy. The issue is that some are too thick and you can feel it when you sleep. If you have a thin yoga mat laying around this would be a great fix to stop your mattress from sliding.

Shelf liners– Often seen in the kitchen you can also find them in the tool area of your home improvement store. I prefer the ones you buy at the home improvement store because you get more and they’re cheaper. It is used in toolboxes to keep tools from sliding all over the place; its a great affordable option for a mattress that moves too much.

Double-sided tape– Not the best option but does work. Will leave sticky residue behind so only use it as a last resort.

New bed frame– Your bed frame could be old and worn out. Why keep fighting it when you can get a bed frame that prevents your mattress from sliding. If you have box spring this could be the answer you’re looking for, check out platform bed frames.

Worn out mattress– Don’t forget to consider that your mattress could be worn out if it’s over 7 years old its time for a new one.

Velcro– I’ve had a somewhat pleasant experience with this. The trick is only to use it on smaller mattresses. A queen or king size mattresses should avoid this one.

Vacuum under your mattress– Over time dust and dirt builds up on the underside of your mattress and on top of your box spring. This dirt can act like little wheels and cause the mattress to slip around. Give the mattress a good vacuuming along with the box spring.

Welcome Mat– People laugh at this one, but it’s super effective especially you have a spare mat. The welcome mats you put in front of your door on the inside are often super grippy on the bottom. Fold that sucker in half so that the grippy side is on both sides and use that to stop your mattress. Make sure to lay the rug long ways on the direction the mattress moves or it will just unfold and not work.

Ratchet Strap– This is more of anextrememethod, but boy does it work! Get yourself some ratchet straps and strap the top and bottom of your mattress to the bed frame or box spring. The only way your mattress will move is with the bed frame – so not much at all.

Mattress Encasement– While every mattress should have some type of mattress protector on it you can get encasements to help stop your mattress from moving.

Rails– Make your own wooden rails. Stick it between the box spring and the bed frame so that the mattress does not move.

How To Keep The Whole Bed From Sliding

If you’re looking for a way to keep your whole bed from sliding on the floor because you have tile or hardwood floors, then you’ll need Furniture Grippers. They will keep the legs of the bed from sliding around on such slippery floors.

Even if you locked the wheels of your bed frame, they still slide on tile and hardwood. Those furniture stoppers keep the entire bed frame from slipping as the rubber of the stoppers give it grip.

How To Stop Memory Foam Mattress Topper From Sliding

If you have a memory foam mattress topper that keeps sliding off the top of your mattress you can also use the non-slip pads too. Just place the pad under the mattress topper and on top of the mattress to keep it from sliding.

You can also try tighter fitting sheets too. I recommend bed sheet suspenders to help keep the sheets on.

Your Mattress is Old and Nasty

If you have noticed your mattress seems to be sliding around a lot more than it used to then it’s a good clue that it’s old and nasty. Over the years body oils and other nasty stuff has created a layer that makes sliding around a lot easier.

You see this more in mattresses you flip, but even the ones you don’t still can get dirty from regular use. This is why having a mattress protector or mattress encasement like we mentioned above is so important. These protectors keep body fluids and other nasty stuff away from your mattress which helps it last longer.

So what should you do?You can clean the mattress, but if your mattress is over 5 years old, then it might be time to consider a new one.

Yes, I know what you’re thinking – Mattress shopping sucks, and they’re expensive! Well, this is because you been buying the wrong mattresses in the wrong places. I find that buying mattresses online to be a better experience and they’re usually cheaper. You don’t have to deal with annoying salespeople, and online retailers don’t have the overhead like storefront retailers do so they can sell the mattresses cheaper.

But what about testing the mattress?To be honest, in all reviews and testing I do I find that most people don’t like any mattress they get…. until it breaks in. Just like shoes you need to break in the mattress. People forget this because they have had their old mattress for too long and they forget these things.

What should you buy?When purchasing a mattress online its best to look at the reviews and also see what people are saying about the mattress before buying it.

There is plenty of mattresses to choose from, and most of them are Memory Foam. If you never slept on memory foam before, it might take a week to get used to but once you do you’ll never go back. The perk of memory foam is that it’s heavy and dense, so it’s less likely to move around on you. I like to use a platform bed frame that has wooden slats to keep the mattress from moving as much.

Hopefully, you have found a method on how to stop your mattress from sliding. The best bet if you ask me is theGorilla Grip Matmentioned at the start. If your mattress is old or nasty then the best thing you can do is get a new one.

How To Keep A Futon Mattress From Slipping

Futon mattress currently is a common furniture in a lot of Western families. It is not only impact, comfortable but also convertible between a sofa and a bed. However, like anything else in the world, it gets some drawbacks that may drive you crazy. Among them, we suppose that one thing making futon mattress out of your favorite lists is that it keeps slipping off the futon frame. But now, we have a way to solve this problem. Let’s find out how to keep a futon mattress from slipping soon!

If the futon mattress materials cause slipping

In general, the material used to manufacture the futon mattress is the one of the most common reasons why the mattress keeps slipping off the frame. Therefore, the friction between the bottom of the futon mattress and the surface of the frame is not enough. In this case, gripper is a great solution you can use to increase the friction and you can do it by yourself with simple items which you can buy from local store.

First of all, to know how to keep a futon mattress from slipping, you should find out some non-slippery materials which often come in roll format and people use it to put between two surfaces to keep them in place. Like doing with other surfaces, you cut some pieces of grip tapes, place them in different positions in the surfaces of the frame which will be contact with the bottom of the futon mattress.

A futon mattress cover is another solution for the question how to keep a futon mattress from slipping. In this case, it is more simply since you just only need to go to the store and purchase a suitable cover for your mattress. The cover not only protects your mattress from stains and dust but also help to keep in place.

If the squeaky frame is the reason why

The slipping issue is not only caused by the futon mattress material but the frame sometimes could be a reason. A frame in saggy situation can make the mattress slip in seconds. To solve this, you simply need to tighten all the bolts of the frame. It is highly recommended to have a check the frame’s bolts every month to make sure that they are strong enough to sleep on as well.

If the frame is unlevel

The unlevel frame is also a reason for the slipping futon mattress. So how to keep a futon mattress from slipping in this situation? Unlevel frame means that this frame is placed in unlevel surface, if you notice. You just need to adjust the position, bring the frame to a level position so the problem is solved.

If your movements during the sleep is the culprit

If you have tried all of the above solution but your futon mattress still keeps slipping off the frame, it is possible that your tossing and turning during the night you create cause this problem. While slipping, you move continuously on the surface of the mattress. In this case, you have better use the straps to secure your mattress to the frame.

To do so, firstly you should prepare sewed cording on the futon mattress’s edges, then place the mattress on top of the frame as usual. As a result, the mattress doesn’t slip anymore since when slipping, it will be stuck by the openings of the frame. All things are done! Enjoy your sleep soon.

How to Keep a Futon Mattress From Sliding

Futons have quickly become a superb alternative for traditional mattresses. They’re comfortable, compact, lightweight, and easy to maintain.

There’s only one problem with them. And it’s actually pretty annoying:

They tend to slide off the bed framewhile you’re sleeping, thus disrupting your shut-eye and causing discomfort.

Is there any way to prevent that?

Well, there actually are4 possible ways onhow to keep a futon mattress from sliding. And at least one of them should work for you.

Quick Links

What Causes a Futon Mattress to Slide Off?

Before we dive in, let’s figure out why even the best futon mattress isn’t immune to sliding off.

The most obvious reason is its small weight, which makes itoverly responsive to movements. But it’s not the only one:

  • Futon materials.The construction of most futon mattresses is pretty much the same. However, cotton and polyester blends that are typically used for cover fabrics have little to no grip against a metal or wooden bed frame, which can make it a challenge to keep a futon in place .
  • Wobbly bed frame.An unlevel or saggy bed frame is usually the main culprit when it comes to mattress sliding. To eliminate this issue, inspect all the joints and tighten up the bolts. You may also want to move your bed onto a more uniform surface.
  • Your excessive movement.Finally, if you toss and turn a lot, this will affect the positioning of your futon mattress anyway, causing it to travel around the bed with you on top.

So,How to Keep a Futon From Sliding?4 Solutions

Fixing your futon mattress in one position is actually not that hard. So, check out the solutions I’ve found for you and just choose the one you’ll find the most appealing.

The easiest way to keep a futon mattress from slipping is to cover it with a fitted bed sheet. Or, you canpurchase a removable sofa cover, which people use for refreshing their interiors, and wrap it around your futon mattress.

Besides keeping your futon mattress from sliding, this covercan serve as a protectionfrom spills and thus prolong the lifespan of your futon.

#2 Try Grip Strips or Velcro

If your bed frame has wooden slats, you can purchase anadhesive grip stripat a hardware store. It is typically made of soft polyfoam and has a sticky side. Here’s how you secure your futon with this strip:

  • Remove the futon from the bed frame.
  • Measure the length of each slat and cut the corresponding piece of grip strip.
  • Remove the paper layer on the sticky side and glue one piece to each slat, applying a bit of pressure. The foam side should face upwards, as it will be holding your mattress in place.

That’s it! Now you have a tenacious surface that will prevent your futon from sliding off.

“Grip strips can also act as a shock-absorbing pad and make your bed frame quieter. This may come in handy for owners of older beds.”

SomeVelcro stripscome with an adhesive side, too, so you can use them for a firmer grip. The technique is pretty much the same here:

  • Glue the hook side of the Velcro to the bed frame.
  • Attach the loop side to the futon mattress, making sure that both hook and loop sides will cling onto each other precisely. You can use safety pins for that, and don’t worry, this won’t damage the mattress.
  • Stick them together.

#3 Make Hand-Made Corner Straps

If you’re more of a ‘do-it-yourself’ person, you can make ahandmadefuton mattress holder. All you need for that is a piece of cording or a narrow strip of fabric and some needle and threads.

  • Measure the height of your bed frame and, based on the result, cut the cording into shorter pieces so that they would be at least twice as long as the bed frame’s height. You’ll need 8 pieces.
  • Sew two pieces of cording on each corner of your mattress and, once done, place the mattress back onto the frame.
  • Wrap the pieces on each corner around the nearest slat or lag of the frame and tie together so that they would secure the futon tightly.

The advantage of this solution is that corner straps perfectly hold the futon mattressin both sofa and bed positions.

#4 Place a Rubber Mat Under the Futon

Finally, you can just place a rubber mat onto your mattress support and put a futon mattress on it. I have useda couple of yoga matswith a Queen bed frame and they have worked just fine.

To make the most of this solution, though, you need to clean your bed frame first. The thing is, dust and debris particles can accumulate on the surface of the slats, making them even more slippery. Vacuuming under the bed will help you to get rid of it all and enhance the grip.

Have you tried any of these ways to keep your futon in place before? Feel free to share your experience or your own solution below!

Best Rated Futon Bed Picks & Reviews – 2020 Edition

Transparency Disclosure– We may receive a referral fee (at no additional cost to the buyer) for products purchased through the links on our site or other applicable pages. To learn more, please read our full disclosure pagehere . We also encourage you to read about how we may research and/or test Products here .

Do you have to deal with limited living space? Maybe you live in a house which has a single bedroom yet you have two kids that need to use it, leaving you with nowhere to sleep? Or maybe you have two bedrooms, but you’ve invited your closest couple to come over for the weekend, but you don’t really have room for them?

If these are struggles that you have to deal with regularly, don’t worry too much – it’s something common, and most of us have to deal with it as well. Luckily for you, there is a convenient solution.

You can easilyturn your sofa into an additional bedusing something as simple as a cheap futon bed that’s comfortable and convenient. This provides the much-neededcomfort and convenience at a fraction of the priceyou’d have to spend for a new mattress.

Nevertheless, the market is overly saturated with futon beds, and this only makes it harder for you to decide which mattress to go with. This is why we’ve taken the liberty to provide you with a quick overview of the things you should account for when choosing one. Hopefully, this will make your life a lot easier. We’ve hand-pickedthe 5 highest rated futon mattressesso that you don’t have to wander around aimlessly.

  • Type: Convoluted Foam, Cotton Fiber
  • Height: 8"
  • Warranty: 5 Years
  • Type: Foam
  • Height: 8"
  • Warranty: 10 Years
  • Type: Memory Foam, Innerspring, Cotton Fiber
  • Height: 10”
  • Warranty: 3 Years
  • Type: Memory Foam
  • Height: 8"
  • Warranty: 5 Years
  • Type: Cotton Fiber, Foam, Innerspring
  • Height: 8"
  • Warranty: 5 Years

Futon Mattress Buying Considerations


Right off the bat, you ought to account for how often you or your guests may need to sleep on the futon. In case you have the need to use it on occasion just as a guest bed, you can consider getting a cheaper soft option made out of less expensive materials, such as a cotton-filled one.

On the other hand, if you plan to use it every night as your regular bed because you have to leave the kids sleep in the bedroom, you ought to consider a high-quality, reliable, possibly coil-filled futon bed with the proper structure and comfort.

Keep in mind that sleeping on a mattress which is not fit for your posture is capable of causing some serious deformations and consequential issues. The last thing you’d want is to get a back misalignment from not spending a few more dollars more on a reliable and high-quality mattress.

There are also great Japanese futons, which may be an entirely different and intriguing option for you to explore.


When it comes to your futon bed, you also want to think about the way you want it to appear. Don’t forget that as much as you want for it to be incredibly comfortable, you can alsothink about its appearance.

Even though coil-filled futon mattresses are usually regarded as particularly comfortable, some can be much likely to lose a lot of their shape as time passes.

On the other hand, some memory foam futon beds can hold andmaintain their shape for a substantially longer period. Additionally, the latter is sometimes considered better for futons that are commonly used as couches.


It goes without saying that comfort is just about the most important thing that you’d want to look forward to when picking your futon mattress. Remember, though, that comfort is not just about sleeping well but also about sitting comfortably as well. This is not a regular bed – it’s a futon, so it has to serve a dual purpose.

Make sure that you get a bed which is going to be comfortable not only for sleeping but for sitting. The materials which are used to craft the solution are ultimately going to determine the comfort that you get from it.


The type of futon that you have alongside its overall structure would determine the thickness of the mattress.

While it’s true that a sleek and thin futon mattress may look better than a bulky one, you might have to go for a thicker option if your sofa bed is made out of wood, for instance. The mattress needs to match the structure in order to make sure that you get a comfortable sleeping solution.

So, for instance, a futon mattress which isabout 8 inches thickcan offer quitea lot more comfort for an adult sleeperincomparison to a six-inches thick one; it depends on the materials used. An additional consideration to account for here is the weight of the person who will usually sleep on it – it’s generally advisable that the heavier the person, the thicker the mattress needs to be to help prevent bottoming out.

Number of Folds

You will either get a bi-fold or a tri-fold mattress. If it is bi-fold, it is going to fold just once in two separate pieces. If it is a tri-fold, it will fold twice into three separate pieces.

The number of folds is solely dependent on the type of frame that you have. With this in mind, it’s important to check with the manufacturer to determine whether you need a tri-fold or a bi-fold unit. If you are replacing an existing bed, simply check the folds that you have currently and purchase a unit accordingly – it’s as simple as that.

The Frame Matters

As we’ve mentioned above, the frame has a serious impact on the type of mattress that you will get. The quality of the latter should match that of the former. Just think – would you invest in an expensive frame only to top it with a budget futon bed or vice versa?

For example, if you have a wooden frame and you plan to have your futon for a longer period of time, you can make sure that your mattress matches your intentions.

On the other hand, if you are looking for a solution that you are unlikely to use for more than a few years, you can afford to purchase something cheaper. This is where wood composite or particle board frames are particularly useful and you can pair them with a bed which is less expensive and of lower quality.


The durability of the bed is mainly determined by the materials which are used to create it. As a general rule of thumb, you ought to go for a futon mattress which is made up of materials which shouldlast longerwhile also providing you with the necessary comfort and convenience.

Additionally, you also want to take a look at the warranty periods. This is going to show you the approximate amount of time that the manufacturer thinks the mattress will last without manifesting any issues.

However, it is also important to understand that if you want your bed to last longer, you ought to make sure that it is properly taken care of.

The size of your mattress would be solely determined by the size of the frame. There is nothing specific here – just make sure that the former matches the latter perfectly.

Add a Comment: